User`s guide

Error! Style not defined.
4.6 Profit Optimizer’s DQP Comb Constraint Detail Display
64 Profit Optimizer User's Guide 1/00
Honeywell Inc.
Table 4-6 Profit Optimizer’s DQP Comb Constraint Detail Control Functions
Use the Profit Optimizer’s DQP Comb Constraint Detail Screen for These Tasks . . .
Operator Engineer
• Displaying the combined constraint status and
operating values.
• Displaying the current and estimated combined
constraint values.
• Describing the combined constraint.
• Setting combined constraint high and low limits.
• Setting CV ramp rates and error tolerance.
• Setting the desired CV resting value.
• Setting CV performance ratios and economic functions.
Field Descriptions
Table 4-2 Profit Optimizer’s DQP Comb Constraint Detail – Understanding the
Fields and Using the Targets
Profit Optimizer’s DQP Comb Constraint Detail – Field Descriptions and User Notes
Field
Description
Field Type Default Access
User Notes
Desc
Target ENG
Description that characterizes the variable's function or location.
To re-describe the variable, touch the
target, type the new description,
press <ENTER>.
Cur Value
Read-Only No Access
The value of the combined constraint at the current execution.
Dashes display when the source
value is bad or unavailable.
Est Value
Read-Only No Access
The estimated value of the CC at the current execution. This
value includes bias.
Est SS Value
Read-Only No Access
The value of the CC at the estimated economic SS.
CC Setpoint
Target ENG
Desired value for the combined constraint.
Lo Limit
Target OPER
Low end of the operating range. The lowest acceptable value.
Hi Limit
Target OPER
High end of the operating range. The highest acceptable value.
Status
Read-Only No Access
GOOD or BAD.
See CV, MV,DV, BDV, & CC
statuses in section 2.2 for status
descriptions
Scale Factor
Read-Only No Access
Factor used to scale the gain matrix to the gain precision.