User`s guide

Section 4 – Displaying and Using the Detail Screens
4.6 Profit Optimizer’s DQP Comb Constraint Detail Display
1/00 Profit Optimizer User's Guide 63
Honeywell Inc.
4.6 Profit Optimizer’s DQP Comb Constraint Detail Display
Sample Screen
Figure 4-5 shows a sample Profit Optimizer’s DQP Combined Constraint Detail
screen. Your display will show different point names and values.
Figure 4-5 Profit Optimizer’s DQP Comb Constraint Detail Display
Using the Screen
This is how you display this screen, with some notes on what you can do here:
• To Display This Screen On the DQP Comb Constraint, touch a variable
description.
• What You Can Do on This Screen Table 4-6 describes the information that
displays and the control and tuning parameters that can be set from the Profit
Optimizer’s DQP Comb Constraint Detail screen.
• Paging through Detail Screens Select the directional targets on the display
(upper right corner), or press the <PAGE BACK> and <PAGE FWD> keys
on the console. DQP Comb Constraint Detail pages cycle in the same order as
the combined constraints are listed on the Summary display.