User`s guide

Section 4 – Displaying and Using the Detail Screens
4.5 Profit Optimizer’s DQP Bridge DV Detail Display
1/00 Profit Optimizer User's Guide 61
Honeywell Inc.
Table 4-5 Profit Optimizer Bridge DV Detail Control Functions
Use the Profit Optimizer Bridge DV Detail Screen for These Tasks . . .
Operator Engineer
• Displaying the Bridge DV status and operating
values.
• Select [TAG] to see the Point Detail pages for the
Bridge Output point.
• Select [SOURCE] to see the Point Detail pages for
the point providing the process value used by the
controller.
• Describing the Bridge DV.
• Displaying BridgeDV values at the current and at the previous
execution.
• Setting critical or non critical bridge DV control.
• Turning non critical Bridge DVs ON and OFF.
Field Descriptions
Table 4-6 Profit Optimizer’s DQP Bridge DV Detail – Understanding the Fields and Using the
Targets
Profit Optimizer’s DQP Bridge DV Detail
Field Descriptions and User Notes
Field
Description
Field Type Default Access
User Notes
Tag
Target OPER
Tag name. The name of the bridge output interface point.
Select the target to call the Point
Detail pages.
Desc
Target ENG
Description that characterizes the variable's function or location.
To redescribe the variable, touch
the target, type the new description,
press <ENTER>.
Source
Target OPER
The name of the point-dot-parameter providing the process value
used by the optimizer.
Select the target to call the Point
Detail pages.
Cur Value
Read-Only No Access
The value of the bridge DV at the current execution.
Last Value
Read-Only No Access
Value at the previous optimizer execution.
Est Value
Read-Only No Access
Best model estimate of the current value excluding the effect of
noise.
Est SS Value
Read-Only No Access
Best model estimate of the steady state value excluding the effect
of noise.
RMPCT Appl #
Read-Only No Access
The number of the Profit Controller associated with the optimizer.
DV #
Read-Only No Access
The number of the DV in the Profit Controller associated with the
optimizer.