User`s guide

Error! Style not defined.
4.4 Profit Optimizer’s DV Detail Display
58 Profit Optimizer User's Guide 1/00
Honeywell Inc.
Table 4-5 Profit Optimizer’s DQP MV Detail Control Functions
Use the Profit Optimizer’s DQP MV Detail for These Tasks . . .
Operator Engineer
• Displaying the DV status and operating values.
• Select [TAG] to see the Point Detail pages for the DV
interface point.
• Select [SOURCE] to see the Point Detail pages for the
point providing the process value used by the controller.
• Displaying DV values at the current and at the previous
execution.
• Describing the DV.
• Setting critical or non critical DV control.
• Turning non critical DVs ON and OFF.
Field Descriptions
Table 4-6 Profit Optimizer’s DQP MV Detail – Understanding the Fields and Using the Targets
DV Detail Display – Field Descriptions and User Notes
Field
Description
Field Type Default Access
User Notes
Tag
Target OPER
Tag name. The name of the Profit Controller
(RMPCT) DV interface display point.
Select the target to call the Point Detail pages.
Desc
Target ENG
Description that characterizes the variable's
function or location.
To redescribe the variable, touch the target, type the
new description, press <ENTER>.
Source
Target OPER
The name of the point-dot-parameter
providing the process value used by the
controller.
Select the target to call the Point Detail pages.
CurrValue
Read-Only No Access
The value of the DV at the current execution.
Last Val
Read-Only No Access
Value at the previous controller execution.
RMPCT Appl #
Read-Only No Access
The number of the Profit Controller associated
with the optimizer.
DV #
Read-Only No Access
The number of the DV in the Profit Controller
associated with the optimizer.
RMPCT Status
Read-Only No Access
GOOD, CRIT, DROP, or INAC.
See CV, MV, DV, BDV and CC Statuses in Section
2.2 for status descriptions.