User`s guide

Section 4 – Displaying and Using the Detail Screens
4.3 Profit Optimizer’s DQP MV Detail Display
1/00 Profit Optimizer User's Guide 55
Honeywell Inc.
Profit Optimizer’s DQP MV Detail – Field Descriptions and User Notes
Field
Description
Field Type Default Access
User Notes
MV Max
Move Up
Target ENG
The largest single move the controller can make at each
execution when increasing the MV.
MV Max
Move Down
Target ENG
The largest single move the controller can make at each
execution when decreasing the MV.
Lo Limit
Ramp Rate
Target ENG
Sets the rate at which the Active low limit ramps to meet
a new [LO LIMIT].
• Whenever the Active low limit is below the
Operator-set low limit, the Active low limit ramps
to the new limit.
- If the MV is below the Active limit, the MV
ramps by the specified rate at each
execution.
- If the MV is above the Active limit, the MV
ramps at 10 times the specified rate.
• Ramping occurs when:
- Low limit is raised, or
- MV is below the Operator-set low limit when
the MV is turned ON and [LIM TRACKS
VAL] = OFF.
Hi Limit
Ramp Rate
Target ENG
Sets the rate at which the Active high limit ramps to meet
a new [HI LIMIT].
• Whenever the Active high limit is above the
Operator-set high limit, the Active high limit
ramps to the new limit.
- If the MV is above the Active limit, the MV
ramps by the specified rate at each
execution.
- If the MV is below the Active limit, the MV
ramps at 10 times the specified rate.
• Ramping occurs when:
- High limit is lowered, or
- MV is above the Operator-set high limit
when the MV is turned ON and [LIM
TRACKS VAL] = OFF.
RMPCT Appl
#
Read-Only No Access
The number of the Profit Controllers associated with the
optimizer.
MV #
Read-Only No Access
The number of the MVs in the Profit Controller
associated with the optimizer.