User`s guide

Section 4 – Displaying and Using the Detail Screens
4.2 Profit Optimizer’s DQP CV Detail Display
1/00 Profit Optimizer User's Guide 47
Honeywell Inc.
Table 5-1 Profit Optimizer’s DQP CV Detail Control Functions
Use the Profit Optimizer’s DQP CV Detail Screen for These Tasks . . .
Operator Engineer
• Displaying the CV status and operating values.
• Setting CV high and low limits.
• Select [TAG] to see the Point Detail pages for the CV
interface point.
• Select [SOURCE] to see the Point Detail pages for the
point providing the process value used by the controller.
• Turning non critical CVs ON and OFF.
• Displaying the current and predicted PV values.
• Displaying the CV predicted future and steady state
values, unbiased model PV, and the scaling factor.
• Describing the CV.
• Setting critical or non critical CV control, and turning
control ON and OFF.
• Setting CV ramp rates and error tolerance.
• Setting the desired CV resting value.
• Setting CV performance ratios and economic functions.
Field Descriptions
Table 5-2 Profit Optimizer’s DQP CV Detail – Understanding the Fields and
Using the Targets
Profit Optimizer’s DQP CV Detail – Field Descriptions and User Notes
Field
Description
Field Type Default Access
User Notes
Tag
Target OPER
Tag name. The name of the Profit Controller
(RMPCT) CV interface display point.
Select the target to call the Point Detail pages.
Desc
Target ENG
Description that characterizes the variable's
function or location.
To re-describe the variable, touch the target, type
the new description, press <ENTER>.
Source
Target OPER
The name of the point-dot-parameter
providing the process value used by the
optimizer.
Select the target to call the Point Detail pages.
PV Value
Read-Only No Access
The value of the CV at the current execution.
Dashes display when the source value is bad or
unavailable for longer than the [# OF BAD READS
ALLOWED].