User`s guide

Section 3 – Displaying and Using the Summary Screens
3.3 Profit Optimizer’s DQP MV Summary
36 Profit Optimizer User's Guide 1/00
Honeywell Inc.
Table 3-3 Profit Optimizer’s DQP MV Summary Control Functions
Use the Profit Optimizer’s DQP MV Summary Screen for These Tasks . . .
Operator and Engineer
• Displaying every MV in the optimizer.
• Displaying the MV descriptions, status, and operating values.
• Displaying MV high and low limits.
Field Descriptions
Table 3-4 Profit Optimizer’s DQP MV Summary – Understanding the Fields and Using the Targets
Profit Optimizer’s DQP MV Summary – Field Descriptions and User Notes
Field
Description
Field Type Default Access
User Notes
APL
Read-Only No Access
The RMPCT application number.
MV #
Read-Only No Access
The MV number within the RMPCT application.
MV Description
Target OPER
Description that characterizes the variable's
function or location.
• Select the target to call the MV Detail screen.
Stat
Read-Only No Access
Status. ON, FFWD, HIGH, LOW, SERV, INIT,
or INAC.
• Whether the MV is dropped or used as a
feedforward value is set on the MV Detail display.
• See CV, MV, DV, BDV and CC Statuses in
Section 2.2 for status descriptions.
Value
Read-Only No Access
The value of the MV at the current execution.
RMPCT SS,
DQP SS
Read-Only No Access
This column displays the predicted RMPCT
and Profit Optimizer (DQP) steady state
values.
Values Display In Color
• Cyan = Predicted to be within limits.
• Yellow = Predicted to be near limits.
• See Application Notes for an illustration.
Lo Limit
Read-Only No Access
Low end of the operating range. The lowest
acceptable value.
Hi Limit
Read-Only No Access
High end of the operating range. The highest
acceptable value.