User`s guide

Section 2 – Application Selection and Optimizer Detail Displays
2.3 RMPCT DQP Detail Display
1/00 Profit Optimizer User's Guide 25
Honeywell Inc.
Field Descriptions
Table 2-2 RMPCT DQP Detail –Understanding the Fields and Using the Targets
RMPCT DQP Detail Field Descriptions and User Notes
Field
Description
Field Type Default Access
User Notes
Tag
Target OPER
Name of the optimizer point.
Select to call the Point Detail pages.
Desc
Target ENG
Description of the optimizer, typically the
name of the process unit or section.
To redescribe the optimizer, touch the target, type the
new description, press <ENTER>.
Msg Pnt
Not for TPS AMW
Target ENG
Name of the Profit Optimizer message
point.
To enter a new message point, INACTIVATE the
optimizer point first.
File Type
Optimizer
Model
Specification
Configuration
Read-Only No Access
The .YS, .YM, and .CFG optimizer definition
files created by the off-line design (from the
Optimizer Builder).
These files supply the Profit Optimizer models and
optimizer configuration. The configuration file is only
for TPS version of Profit Optimizer
TDC3000 Pathname
or
TDC3000 AMW
(TPS node or
GANT) Filename
Target ENG
Path to the .YS and .YM optimizer files on
the system. The configuration file on the
TPS (AMW) node.
Select the target, enter the path and file name, then
press <ENTER>.
ATTENTION
For the TPS versions, only the file names are entered.
NO extensions or paths should be specified.
File Read
Read-Only No Access
Either (1) The time when the optimizer was
installed, or (2) The time when the optimizer
files were last read.
Duration:
Time it took to read the optimizer files.
Last Exec
Read-Only No Access
Starting time of the last optimizer execution
(updated at the beginning of each
execution).
Duration:
Time it took to complete the optimizer execution
(updated at the end of each execution).
Less than the execution frequency unless the cycle
overruns. On an overrun, a counter is incremented,
and the next execution is delayed. When the overrun
limit is violated, the optimizer shuts down.