User`s guide

Section 1 — An Operator’s Quick Tour of Profit Optimizer Displays
1.7 Profit Optimizer Messages and Help
16 Profit Optimizer User's Guide 1/00
Honeywell Inc.
1.7 Profit Optimizer Messages and Help
Messages
Application Error Messages Select the [STATUS MESG] button on the Menu
Bar to display application error messages. These messages indicate conditions
about Profit Optimizer software and optimizer. Error messages remain on the
messages display as long as the error is in effect.
For a description of the messages and the suggested responses to the optimization
or software errors, see Section 9.
Message Summary and Alarms Some Profit Optimizer messages are written to
the system Message Summary. You display the Message Summary by pressing the
<MSG SUMM> button on the console.
Profit Optimizer itself does not generate alarms on error. Alarms are handled by
the LCN software and the advanced process control design.
Run Time Messages and History For run time messages and process
historization, look in the Message Journal.
Help
Error-on-Input Messages Information messages display in the hot corner (upper
left) of the screen when you touch a target, or when you try to do something that
Profit Optimizer does not allow.
Parameter Descriptions/CDS Locations On the Detail displays, selecting the
control parameter names (pressing the named fields, not the values or targets)
displays descriptions of the parameters and their CDS location. This information
displays above the Menu Bar.