User`s guide

Section 1 — An Operator’s Quick Tour of Profit Optimizer Displays
1.6 Profit Optimizer Display Structure
14 Profit Optimizer User's Guide 1/00
Honeywell Inc.
1.6 Profit Optimizer Display Structure
Number and
Purpose of the
Profit Optimizer
Displays
The Profit Optimizer interface comprises 18 displays. The Profit Optimizer
interface provides the following administrative, control, tuning, and configuration
functions:
• Optimizer selection
• On-line messages
• On-line help
• Optimizer management (operating parameters, optimizer input)
• Configuration management (configuration, tuning, optimization parameters).
Calling Sequence
of the Profit
Optimizer
Displays
Most displays can be called directly from the Menu Bar. Others, however, can
only be called by selecting targets on higher level displays. Figure 1-2 illustrates
the hierarchy of the Profit Optimizer displays.
Figure 1-2 Display Calling Sequence
Indicates a calling sequence from a higher to a lower level display.
Optimizer Selection
DQP Main Menu
RMPCT
18
Control Input
Variable Summary Displays
CV Summary
MV Summary
DV Summary
DBV Summary
CC Summary
Optimization
Optimizer Detail
Display
2
Configuration
RMPCT Configuration
Display
BDV Configuration
Display
DQP/RMPCT Configuration
3
MV Tuning Display
Optimizer Tuning
15
CV Tuning Display
Optimizer Tuning
16
Variable Detail
Displays
DQP Bridge DV
Configuration
4
CV Detail
MV Detail
10-14
DV Detail
BDV Detail
CC Detail
1
5-9
Optimizer Description
Messages
17
Profit Optimizer displays are discussed in detail in Sections 3 through 6.
Display
Descriptions
Table 1-10 describes the roles of the screens and how to display them. Higher
level displays are indicated in the Called From column.