User`s guide

Section 1 — An Operator’s Quick Tour of Profit Optimizer Displays
1.3 How to Read the Profit Optimizer Displays
1/00 Profit Optimizer User's Guide 7
Honeywell Inc.
1.3 How to Read the Profit Optimizer Displays
Fields and Targets
Fields and targets are reserved areas on a display, dedicated to a particular purpose
or kind of information. In this respect fields and targets are much the same.
For convenience, however, fields and targets in Profit Optimizer have special
meaning, described in the following table:
Table 1-5 Fields and Targets Explained
In the Profit Optimizer Library of Books . . .
This Term Means This
Field
Fields are read-only screen areas. Fields display information that you cannot change.
Read-only information displays without borders outlining the field.
The time and date stamp, for example, is a read-only field.
Target
Targets are screen areas that accept, tuning, configuration, and optimization input
from the keyboard, or that execute touch-screen commands.
Targets are surrounded by borders. Pressing anywhere within the rectangular border
either opens the target, or executes the command.
• Open Targets Open targets accept keyboard or touch-screen input. Open
targets are surrounded by a yellow border.
• Closed Targets Closed targets do not accept keyboard or touch-screen input
when touched. Closed targets are surrounded by a blue border. A target can be
closed for two reasons:
1. A higher access level is required, or
2. The CV or MV is critical, and certain changes to critical variables (such as a
mode change to an MV) cannot be made.