Specifications

CONFIDENTIAL INFORMATION © 2005 AMX Corporation. All rights reserved. AMX and the AMX logo are registered trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
For more information about AMX products and services visit
www.amx.com
10-05
Most audiovisual devices, such as audio and video cassette
recorders, compact disc players and tuners, can be remotely
contr
olled by either infrar
ed (IR) or serial data commands. The
AXC-IR/S Infrared Serial Card generates programmed
commands specific to each device by manufacturer, model
number and function. Up to 128 functions can be programmed
into each car
d. As needs and technology change, existing car
ds
can be reprogrammed and new cards can be added to the
system. One Infrared/Serial Card is required for each device.
APPLICATION
• Stores and transmits IR and IR/serial control commands
• Commands stored in non-volatile memory
CONTROL PORT
•
IR control port with IR emitter and IR/serial connections
INCLUDES
• One status LED for transmit
• One micro-jumper sets card for No Carrier or Normal operation
•
One CC-IRC or CC-SER control cable
POWER REQUIREMENT
• 45mA @ 12 VDC
Fully compatible with Axcess software, the AXC-EM manages
system operation and executes control system programs. This
Enhanced Master Card can coordinate the activities of up to 255
d
ifferent pieces of equipment, such as other control cards, bus
controllers and various input devices. These include AMX
Tiltscreens, touch panels, softwire panels, wireless receivers and
custom panel interfaces.
APPLICATION
• Provides AXCESS Master processing and features to CardFrame
PROCESSOR: Motorola 16-bit M68340
MEMORY: S
tandard – 64KB; Optional – 256KB
INCLUDES
• One status LED for power and AXLink operation
•
Master Program Port, male DB-9 connector
• Setup switch for Master Port baud rate, parity, stop bits, and data bits
PROCESSOR CARDS
APPLICATION
• Manages communication among control cards in CardFrame
PROCESSOR: Motorola MC68HC705
INCLUDES
• One status LED for power and AXLink operation
• One front-mounted AXLink jack for local testing of panels and Bus Controllers
• Setup switch to set starting device number to CardFrame
Many audiovisual and computer based devices can be
controlled remotely by using RS-232 or RS-422 commands. The
AXC-232 RS-232/422/485 Interface Card can generate a virtually
unlimited number of pr
oduct/function commands as they ar
e
programmed into the AXC-M Master Card. As needs and
technology changes, existing cards can be reprogrammed or
new cards added, one for each device.
APPLICATION
•
RS-232/422/485 data contr
ol transmit and receive
CONTROL PORT: RS-232, RS-422/485 data por
t (300-38,400 baud)
INCLUDES
• Two status LED indicators for transmit and receive
• One setup switch for baud rate, parity
, stop bits, and data bits
• One micro-jumper for 100 ohm RS-422 termination
• One micro-jumper for RS-422 or RS-485 operation
POWER: 125 mA @12 VDC
M
any audiovisual and computer-based devices can be remotely
controlled using RS-232 or RS-422 commands. The AXC-232++
RS-232/422 Interface Card can generate virtually unlimited
numbers of product/function commands as they are
programmed into the AXC-EM Master Card. As needs and
technology change, existing cards can be reprogrammed or new
cards added, one for each device.
APPLICATION
•
Advanced RS-232/422/485 data control and receive
CONTROL POR
T
•
R
S-232/422/485 port (300-115,200 baud), XON/XOFF, CTS/RTS
INCLUDES
• Onboard 32-bit processor and 384KB non-volatile memory
• 1,000 Byte serial input buffer; 1,000 Byte AXLink buff
er
• Two status LED indicators for transmit and re
ceive
• One setup switch for baud rate, parity, stop bits, and data bits
• One micro
-jumper for 100 ohm RS-422 ter
mination
• O
ne micr
o jumper for RS-422 or RS-485 operation
POWER
• 60 mA @ 12 VDC
DIMENSIONS (HXD)
• 2.7" x 12.8" (69.3 mm x 325.6 mm)
WEIGHT
• 8 oz (136.1 g)
DAT A CONTROL CARDS
AXC-EM
Enhanced System Master Card
FG711
AXC-S
CardFrame Server Card
FG705
AXC-232
RS-232/422/485 Interface Card
FG725
AXC-232++
RS-232/422/485 Interface Card
(
enhanced functionality)
FG725-10
AXC-IR/S
IR/Serial Car
d
FG740-01K