Specifications

CONFIDENTIAL INFORMA
TION © 2005 AMX Corporation. All rights r
eser
ved. AMX and the AMX logo are registered trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
For more information about AMX pr
oducts and services visit
www
.amx.com
10-05
CONTACT CLOSURE INTERFACES
The PC1 provides one switched outlet for 120 VAC power
contr
ol up to 1200 W.
CONTROL PORTS
• Either one latched or two momentary closures for discrete on and off, or one
momentary closure for toggling on and off
•
Switched AC receptacle, 10 A at 120 VAC
INCLUDES
• Front-panel on/off button with status LED
• DIP switch to set closure mode
ENCLOSURE: Metal with black matte finish
DIMENSIONS (HWD)
• 1.5" x 5.5" x 5.5" (38 mm x 140 mm x 140 mm)
WEIGHT: 1.6 lbs (737 g)
OPTIONAL ACCESSORIES
• AC-RK Accessory Rack Kit FG515
The PC2 provides two switched outlets for 120 VAC power
control up to 1200 W.
CONTROL PORTS
• Either one latched or one momentary closure for toggling on and off
•
Two switched AC receptacles, total load up to 10 A at 120 VAC
INCLUDES
• Two front-panel on/off buttons with status LEDs
•
DIP switch to set closure mode
ENCLOSURE: Metal with black matte finish
DIMENSIONS (HWD)
• 1.5" x 5.5" x 5.5" (38 mm x 140 mm x 140 mm)
WEIGHT: 1
.6 lbs (737 g)
OPTIONAL ACCESSORIES
• AC-RK Accessory Rack Kit FG515
This 2x1 video/stereo audio switcher can be set for automatic
or manual operation. In the standard manual mode, a single
latched closure is used to select and activate the “B" video
input. In the automatic mode, the “B" input is programmed to
switch instantly to the “A" input when “video sync" is detected.
The “A" input, recognized as the default input, always has
priority.
ST
ANDARD FEATURES
• Detects presence of video sync in auto mode (NTSC, PAL, or SECAN)
CONTROL PORTS
•
Three BNC female connectors for Video Input A, B and Video Out
•
Captive-wire connectors for unbalanced audio and closure input
RESPONSE
• Vi
deo – 8 MHz
• Audio – 30 Hz to 20 kHz
INCLUDES
• Inter
nal jumper to select auto or manual (default) mode
ENCLOSURE: Molded black matte plastic
DIMENSIONS (HWD)
• 1.65" x 5.09" x 6.09" (41.91 mm x 129.28 mm x 154.68 mm)
WEIGHT: 10.9 oz (309 g)
OPTIONAL ACCESSORIES
• PS 2.8 FG423-05
PC1
Power Contr
oller
, 10 A
(110 V
AC only)
FG670
PC2
Dual Power Controller, 5 A
(
110 VAC only)
FG675
The UPC20+ is a dual 20-amp AC power and motor controller
designed for conduit installation. The UPC20 can be configured
for a wide variety of power and motor control modes. Low-
voltage contact-closur
e or open-collector inputs allow control
fr
om simple wall panels or lar
ge systems. It is ETL listed.
CONTROL INPUTS
• Four closure inputs; operation defined by mode
-
Motor Control mode alter
nates between the timed operation
of the two power relays
- Power Control mode allows independent control of both power relays
CONTROL POR
TS
•
Two 2400 W power relays
INCLUDES
•
One-, two- and thr
ee-button logic modes
•
Local test switches with status LEDs
• 115, 230 and 277 VAC control capability
ENCLOSURE: Metal with black matte finish, knockouts for conduit
DIMENSIONS (HWD)
•
8.5" (10.5" including flange) x 4.5" x 2.2"
(220 mm (270 mm including flange) x 110 mm x 60 mm)
WEIGHT
:
3 lbs (1.4 kg)
POWER: Self-power
ed when used with 110/220 V
AC applications
OPTIONAL
ACCESSORIES
•
PS2.8: 12 VDC power supply (r
equir
ed for 277 VAC applications)
FG423-05
UPC20+
Universal Power/Motor Controller,
20 A (110/220 VAC input)
FG672
AV2SM
Auto/Manual Video Switcher
FG5919