Specifications

CONFIDENTIAL INFORMA
TION © 2005 AMX Corporation. All rights r
eser
ved. AMX and the AMX logo are registered trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
For more information about AMX pr
oducts and services visit
www
.amx.com
10-05
INPUT SENSORS
The PCS Power Current Sensor can sense high, low or no power
level states for one device. It requires external DC power.
CONTROL PORTS
•
Two open collector transistor outputs (On and Standby)
INCLUDES
•
LED indicators for Standby and On status
• Sensing for 30 mA-15 A power current levels
•
3-prong, grounded 120 VAC receptacle
ENCLOSURE: Plastic with black matte finish
DIMENSIONS (HWD): 3
.1" x 2.2" x 2.5" (80 mm x 57 mm x 64 mm)
WEIGHT: 4 oz (114 g)
OPTIONAL
ACCESSORIES
• 12 VDC power supply
The PCS2 Dual Power Current Sensor can sense high, low or no
power level states for two devices, and includes a built-in power
supply.
CONTROL PORTS
• Four relay outputs (On and Standby for each source),1 A @ 28 VDC
INCLUDES
• On and Standby status LEDs for each source
• Power LED
• Sensing for 20 mA, 10 A power current levels
• Two US-style 3-prong 120 VAC receptacles
POWER
• 1200 W (10A) input power, fuse protected
• US-style 3-prong 120 VAC power cord
ENCLOSURE: Metal with black matte finish
DIMENSIONS (HWD): 1.5" x 5.5" x 5.5" (38 mm x 140 mm x 140 mm)
WEIGHT: 28.8 oz (806 g)
OPTIONAL ACCESSORIES
• AC-RK Accessory Rack Kit FG515
The VSS2 includes two independent signal detection channels.
Each channel triggers a logic-level output when a signal is present.
Dual video jacks for each channel allow loop-through operation.
Great for use as a power sensor for VCRs and other video sources,
or to pr
ovide a warning on loss of audio, video or RGB signal.
FEATURES: D
etects presence of signal from 1 kHz to greater than 100 kHz
CONTROL PORTS: Two solid-state outputs for channels A and B
INCLUDES
• Four RCA jacks
• Two for each channel for loop-through operation
ENCLOSURE: Molded black matte plastic
DIMENSIONS (HWD): 1
.5" x 5.0" x 5.3" (38 mm x 127 mm x 133 mm)
WEIGHT: 10.9 oz (309 g)
The TVS TV Sensor is an intelligent, digital scan fr
equency
sensor that can send a power on/power off closure signal to an
AMX Input/Output control port. When used with Axcess and
NetLinx Integrated Controller I/O ports, the TV Sensor can be
an integrated solution for automatic, sensed power control of
video/graphic displays.
CONTROL PORTS: One solid-state closure output (Sensed power on/off)
INCLUDES
• Power on/off status LED
• Internal frequency-sensor logic, (15-75 kHz)
• Five-wire cable for closure output, 12 VDC input
ENCLOSURE: Black plastic with matte finish
DIMENSIONS (HWD): 1.1" x 1.1" x 0.8" (27 mm x 27 mm x 20 mm)
WEIGHT: 1.1 oz (3 g)
PCS
Power Current Sensor (for US 110
VAC 3-pole receptacles)
FG426
VSS2
Video Sync Sensor
FG5916-10
TVS
TV Sensor
FG691
control system accessories
PCS2
Dual Power Current Sensor (for US
110 VAC 3-pole receptacles)
FG427
*
LIMITED AVAILABILITY*
RTS-1
Room Temperature Sensor (requires AXC-TEMP card) FG748
The surface-mounted RTS-1 sends precise temperature
measurement, from 0
°-250° F (-18°-120° C), to the AXC-TEMP
Temperature Control Card.
CONTROL PORTS
• Level output
ENCLOSURE: Of
f-white metal for wall mounting
DIMENSIONS (HWD): 4.5" x 2.8" x 0.9" (114 mm x 70 mm x 23 mm)
WEIGHT: 3.2 oz (91 g)