Specifications

ManualsBrandsAMX ManualsTVs & monitorsAXD-CV6

AMX reserves the right to alter speciﬁcations without notice at any time. AMX does not assume responsibility for any errors or omissions.

For more information about AMX products and services visit

www.amx.com

10-05

The NXP-CPI16 NetLinx Custom Panel Interface is a versatile

device, useful for both custom panel and contact-closure

applications. It will directly interface with AMX Touch Panels and

components designed for integration with Axcess Control

Systems. Two 20-pin headers provide ribbon cable wiring or

direct-connect insertion to circuit boards – one provides inputs

for up to 16 closures and the other drives feedback outputs for

LEDs. Under software control, the LED outputs can act as drivers

to 8-segment bargraphs or operate as discrete outputs for

feedback.

In addition, the NXC-CPI16 also provides two quadrature inputs

to control variable levels such as volume or lights. Able to read

digital signals from mechanical or optical rotary encoders, the

response can be adjusted under software control.

STANDARD FEATURES

• Integrates custom panels with 16 closure inputs and 16 LED outputs, pin-for-

pin compatible with panels designed for AXC-CPI16

• Operates as low-cost closure

• Acts as driver for up to two 8-segment LED bargraphs, each bargraph uses

eight of the 16 LED outputs

• Allows precision digital control of up to two levels from quadrature inputs

• Accepts mechanical or optical rotary encoders

• Offers programmable level response, provides software-driven performance

adjustment, and switchable coarse/fine level contr

INPUT CONNECTORS

• Indicator power: Two-pin 3.5 mm captive wire

•

I/O Headers: T

wo 20-pin headers, 8 I/O channels each (16 closur

e inputs

activated with GND or TTL Low (< 0.8 V)). Open collector outputs (0-28

VDC). Inputs are sampled approximately every 10 msec.

• Rotary Encoder inputs: Two quadrature inputs on a 2x3 header (6-pin), two

encoder inputs (4-pin) with a +5 V supply pin (supplying up to 100 mA) and

a GND pin

ICSNET

• Two RJ-45 connectors for ICSNet connection

ID BUTTON

• Generates an event from the AXC-CPI16 to allow you to assign new device

numbers using the ID mode in NetLinx Studio Software

LED

• ICSP status indicator (green)

OPEN COLLECTOR OUTPUTS

• 16-open collector outputs, acting as a switch to ground, up to 100 mA.

Outputs can be connected to voltages ranging between 0 and + 28 V. Each

output is updated every 10 msec

DIMENSIONS (HWD)

• 2.75" x 1.85" x 1.40" (6.99 cm x 4.70 cm x 3.56 cm)

WEIGHT

• 8.10 oz. (229.63 g)

NXP-CPI16

NetLinx Custom Panel Interface

FG2410

NETLINX SYSTEM ACCESSORIES

NXA-CFNI64M

Compact FLASH Upgrade for NI Series Controllers

FG2116-31 64MB

NXA-CFNI128M

Compact FLASH Upgrade for NI Series Controllers

FG2116-32 128MB

NXA-CFNI256M

Compact FLASH Upgrade for NI Series Controllers

FG2116-33 256MB

NXA-CFNI512M

Compact FLASH Upgrade for NI Series Controllers

FG2116-34 512MB

NXA-CFNI1G

Compact FLASH Upgrade for NI Series Controllers

FG2116-35 1GB

NXA-CFM32M