Specifications

CONFIDENTIAL INFORMATION © 2005 AMX Corporation. All rights reserved. AMX and the AMX logo are registered trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
For more information about AMX products and services visit
www.amx.com
10-05
NETLINX CONTROL CARDS
NetLinx Control Cards serve as flexible, modular building blocks for creating advanced control applications. Up to 12 Control Cards
can be inserted into the NXF NetLinx CardFrame’s front-access control slots or supplied in an NXS-NMS NetModule Shell enclosure
for stand-alone operation.
NetLinx Control Cards can meet a wide variety of control needs, including multi-port RS-232/422/485, IR/Serial, Input/Output, Relay,
Voltage, and Volume control. Every NetLinx Control Card includes a full array of LED status indicators at the front, easily viewable from
the NetLinx enclosure’s translucent cover. Whether in a CardFrame or NetModule Shell, NetLinx Control Cards operate directly on the
high-speed ICSNet data bus.
The NXS-NMS NetModule Shell accommodates one NetLinx
Control Card and connects to the NetLinx bus via ICSNet
connections. The NXS-NMS offers a simple and economical way
to integrate additional functionality to control systems. Accepts
all NetLinx (NXC) Control Cards.
STANDARD FEATURES
• Control connector: 20-pin black (male) connector that connects the
NetModule Shell to external devices. These connectors are keyed to ensure
p
r
oper installation
• ICSNet RJ-45 connectors: Receives power and data from a NetLinx
Master/Hub ICSNet Port. An ICSNet port on a NetLinx Master or Hub
supplies up to 500 mA at 12 V for module power
• 12 VDC power supply connectors: Two parallel male 2-pin (green) parallel
connectors for 12 VDC power
ENCLOSURE
• Metal with black matte finish
DIMENSIONS (HWD)
• 1.50"x 5.55"x 9.25" (3.81 cm x 14.10 cm x 23.50 cm)
WEIGHT
• 2.15 lbs. (0.98 kg)
NXS-NMS
NetModule Shell
FG2009-10
The NXC-IRS4 4-Port IR/S Card provides four IR/Serial input
control ports with LED status feedback. Each port in the NXC-IRS4
stores programmed commands for IR- or serial-controlled devices.
ST
ANDARD FEA
TURES
•
Pr
ovides four IR/IR Serial contr
ol ports and front-panel status feedback
• Includes four inputs for sensed IR power control
OPERATION
•
IR 1-4: four IR/IR Serial contr
ol por
ts
•
20 KHz-1.14 MHz
INPUT 1-4
• Four I/O ports for closure or 0–5
• VDC sensing, 200 mA
STATUS 1-10
• Red LED for IR transmission
• Yellow LED for input status
• Green ICSP status LED
WIRING: 3.5mm captive-scr
ew ter
minals
NXC-IRS4
4-Port IR/S Card, 4 IR/S
and 4 Inputs
FG2023
The NXC-COM2 Dual COM Port Card provides two RS-232, RS-
422, or RS-485 control ports and LED feedback for remote
sources connected to the NXF NetLinx CardFrame, NI-4000 or
NXS-NMS NetModule Shell.
STANDARD FEATURES
•
Provides two RS-232/422/485 data control ports and front-panel feedback
OPERATION
• Data 1-2: two RS-232/422/485 contro
l por
ts, supports, XON/XOFF,
CTS/R
TS,
300–115,200 baud
STATUS
• Red LED for data TX, RTS
• Yellow LED for data RX, CTS
• Gr
een ICSP status LED
WIRING
• 3.5mm captive-screw terminals
NXC-COM2
Dual COM Port Card,
2 RS-232/422/485
FG2022
The NXC-REL10 Relay Card provides 10 relays to support
devices that employ simple momentary or latching contact-
closur
e contr
ol with LED feedback.
STANDARD FEATURES
• Provides 10 isolated relays and front-panel LED feedback
OPERATION
• Relay 1-10: 10 relays, 750 mA, 28 VAC/24 VDC normally open
ST
A
TUS 1-10
• One LED for each relay
• Red LED shows on status
•
Gr
een ICSP status LED
WIRING:
• 3.5mm captive-screw terminals
NXC-REL10
Relay Card, 10 Channels
FG2020