Specifications

CONFIDENTIAL INFORMATION © 2005 AMX Corporation. All rights reserved. AMX and the AMX logo are registered trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
For more information about AMX products and services visit
www.amx.com
10-05
The NXF-MINI NetLinx Mini-CardFrame extends the control
capabilities of the AMX NetLinx Control System to a remote
area or location. Compatible with the ME260/64 Master Card,
N
I-2000, NI-3000 and NI-4000 NetLinx Controllers, the Mini-
CardFrame allows the installer to add as many as four NetLinx
device-specific control cards for expanding control and
automation features.
AVAILABLE NETLINX CONTROL CARDS INCLUDE
• 4 – Port IR/Serial
• 2 – Port RS-232/422/485
•
10 – Channel Relay
•
10 – Channel Input/Output
• 4 – Channel Voltage Output/Analog Input
• 4 – Channel Volume
FEATURES
• 25 mA @ 12 VDC
FRONT PANEL
• 1–4: Shows LED status indicators from optional NXC contr
ol car
ds
REAR PANEL
• Slots 1–4: 20-pin control card connectors
• Device: 8-position DIP switch sets the starting address for the Control Cards
in the Mini-CardFrame
• ICSNet: One RJ45 connector for ICSNet interface
• PWR: 2-pin jack for +12 VDC power input
ENCLOSURE
• Metal with black matte finish
MOUNTING OPTIONS
• Rack, wall, or shelf mount
DIMENSIONS (HWD)
• 1.75"x17.0"x9.56" (4.45 cm x 43.18 cm x 24.28 cm)
(width does not include mounting ears)
WEIGHT
• 6.2 lbs (2.8 kg)
NXF-MINI
NetLinx Mini-CardFrame
(CardFrame Only)
FG2104
NETLINX MASTER CARD, CARDFRAME AND MODULES
With an extremely easy-to-use and understand modular design,
t
he NXF NetLinx CardFrame delivers a plethora of control
features for any installation. Built with flexibility and custom
control in mind, the CardFrame is capable of creating a
multitude of networking possibilities.
Take control of any connected device by simply inserting as
many as 12 NetLinx Control Cards into the front-access slots of
the CardFrame. Feel free to exchange and replace cards –
without disturbing control wiring in the back of the unit. It’s
seamless and efficient.
FRONT PANEL COMPONENTS
•
Master/Hub Card slot Houses the Master or Hub Card
• Control Card
slots: 12 car
d slots for the NetLinx Control Cards that control
d
evices connected to the Car
dFrame
REAR PANEL COMPONENTS
• Control Card connectors (1-12) 20-pin black (male) connectors that connect
the optional Control Cards and external equipment to the CardFrame
• +12 VDC PWR 2-pin green (male) connector for connecting a 12 VDC
power supply
• Car
dFrame can be powered via the Master Card (default) or by an external
power supply connected to the Car
dFrame's PWR connector
• 8-position DIP switch address range is 1-3072 CardFrame Number DIP
switch Sets the starting address for the Control Cards in the CardFrame
ENCLOSURE
• Metal with black matte finish
DIMENSIONS (HWD)
• 3.5"x 17.0" x9.6" (8.89 cm x 43.18 cm x 24.38 cm)
WEIGHT
•
9.1 lbs (4.1 kg)
OPTIONAL ACCESSORIES
NETLINX MASTER CARD
•
NXC-ME260/64
FG2010-64
NETLINX HUB CARDS
• NXC-NH: ICSNet Hub Card FG2060
•
NXC-HS: ICSHub Ser
ver Car
d
FG2061
• NXC-HE: ICSHub Expander Card FG2062
NETLINX CONTROL CARDS
•
NXC-COM2: Dual COM Por
t Contr
ol Car
d
FG2022
•
NXC-I/O10: Input/Output Contr
ol Car
d
FG2021
• NXC-IRS4: 4-Port IR/S Control Card FG2023
•
NXC-REL10: Relay Contr
ol Car
d
FG2020
•
NXC-V
AI4: V
oltage Output/Analog Input Contr
ol Card
FG2025
• NXC-VOL4: Volume Control Card FG2024
NXF
NetLinx CardFrame
(
CardFrame Only)
FG2001