Specifications

For more information about AMX pr
oducts and ser
vices visit
www
.amx.com
10-05
CONFIDENTIAL INFORMA
TION © 2005 AMX Corporation. All rights r
eser
ved. AMX and the AMX logo are registered trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
APPLICATION
• Large custom panel, up to 64 pushbuttons; incandescent switch lamps
CONTROL PORTS
•
64 polled lamp LED/switch points; two commons for lamp, LED and switch
Drivers for four bar
graphs
INCLUDES
• Adjustable lamp glow level, 64-pin ribbon cable, 6.0' (1.8 m)
ENCLOSURE
• Molded black matte plastic for free-standing use
DIMENSIONS (HWD)
•
1.5" x 5.0" x 5.3" (38 mm x 127 mm x 133 mm)
WEIGHT
• 18 oz (510 g), including ribbon cable
AXP-CPI
Custom Panel Interface
FG5775-01
APPLICATION
• PC board receives joystick or potentiometer control commands
CONTROL PORTS
• E
ight analog inputs, 10-bit resolution, resistance (5K-100K) or DC (0-5 V)
INCLUDES
• Reference potentiometers, 20-pin ribbon cable, 6.0' (1.8 m)
DIMENSIONS (HWD)
•
3.5" x 2.8" x 0.9" (89 mm x 69 mm x 23 mm)
WEIGHT
• 4.2 oz (118 g), including ribbon cable
AXP-AI8
Analog 8-Input Board
FG783
FEATURES
• Integrates custom panels with 16 closure inputs and 16 LED outputs, pin-for-
pin compatible with panels designed for AXC-CPI16
• Operates as low-cost closure
•
Acts as driver for up to two 8-segment LED bargraphs, each bargraph uses
eight of the 16 LED outputs
•
Allows precision digital control of up to two levels from quadrature inputs
• Accepts mechanical or optical rotary encoders
• Offers programmable level response, provides software-driven performance
adjustment and switchable coarse/fine level control
INPUT CONNECTORS
• Indicator power: Two-pin 3.5 mm captive wire
• I/O Headers: Two 20-pin headers, 8 I/O channels each (16 closure inputs
activated with GND or TTL Low (< 0.8 V)); Open collector outputs (0-28
VDC). Inputs are sampled approximately every 10 msec
• Rotary Encoder inputs: Two quadrature inputs on a 2x3 header (6-pin), two
encoder inputs (4-pin) with a +5 V supply pin (supplying up to 100 mA) and
a GND pin
ICSNET
• Two RJ-45 connectors for ICSNet connection
ID BUTTON
• Generates an event from the AXC-CPI16 to allow you to assign new device
numbers using the ID mode in NetLinx Studio Software
LED
•
ICSP status indicator (gr
een)
OPEN COLLECTOR OUTPUTS
• 16-open collector outputs, acting as a switch to ground, up to 100 mA;
Outputs can be connected to voltages ranging between 0 and + 28 V; With
output updated every 10 msec
DIMENSIONS (HWD)
•
2.75" x 1.85" x 1.40" (6.99 cm x 4.70 cm x 3.56 cm)
WEIGHT
•
8.10 oz (229.63 g)
NXP-CPI16
NetLinx Custom Panel Interface
FG2410
CUSTOM PANEL INTERFACES
The NetLinx
®
Custom Panel Interfaces are versatile devices, useful for both custom panel and contact-closure applications. The
interfaces will directly communicate with AMX Touch Panels and components designed for integration with AMX Control Systems.