Specifications

CONFIDENTIAL INFORMA
TION © 2005 AMX Corporation. All rights r
eser
ved. AMX and the AMX logo are registered trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
For more information about AMX pr
oducts and services visit
www
.amx.com
10-05
4" COLOR PASSIVE TOUCH PANELS
The CB-CP4/A is an optional Conduit/W
allbox for AXD-CP4/A
Color Wall/Flush Mount Touch Panels. It represents a metallic
housing that is installed onto a beam in a pre-wall setting. The
touch panel is housed in a default back box that ships with each
unit that is not removed in the conduit box installation method.
The CB-CP4/A Conduit/Wallbox package includes drywall clips
and screws for installation to studs during the construction phase.
DIMENSIONS (HWD)
•
4.09" x 5.51" x 3.40" (10.39 cm x 13.99 cm x 8.64 cm)
SCREEN RESOLUTION
• 320 x 240 pixels (HV)
VIEWING ANGLE
•
Horizontal viewing angle: -
+
50
°
•
Vertical viewing angle: -
+
5
0°
IR RECEPTION AREA
• 45° up on the AXT (30° on the AXD) from the horizontal plane
• 15° down on the AXT (30° on the AXD) from the horizontal plane
• 40° right of the vertical plane (both AXD and AXT units)
• 40° left of the vertical plane (both AXD and AXT units)
EXTERNAL BUTTONS
• Six interchangeable external pushbuttons; Pushbutton assignments can include
t
he typical Device/Channel numbers, Flip to Page option and String/Macro
• Buttons are used as interface tools that operate on-screen menus or turn
On/Off the controlled equipment
EXTERNAL LEDS
• Six LEDs located alongside each external pushbutton, independently
operated and programmed
BUTTONS
• Set of 18 changeable button caps consisting of: six blanks, two embossed
with Up/Down arrows and 10 engraved with standard icons; these buttons
match the bezel coloring
BUTTONS LABELS
• 10 standard icon pre-printed buttons
• These buttons contain 10 icons covering the following functions: MENU,
LIGHTS, AUDIO, VIDEO, ENVIRONMENT, SECURITY, INTERCOM, MUTE,
DRAPES and POWER
LIGHT DETECTOR
• Photosensitive light detector for adjustment of the panel brightness
MOTION SENSOR
•
Pr
oximity Infrar
ed Detector to wake the panel when the panel is approached
• Activation range: + 20° vertically from center and + 45° horizontally from center
IR RECEIVER
•
38 KHz, one-way IR r
eception (of AMX codes only)
MICROPHONE
•
Used for audio confer
encing applications (intercom functionality)
SPEAKERS
• Frequency response 450 Hz - 7 KHz
AXLINK/POWER
•
4-pin 3.5 mm mini-phoenix connector for communication to the AMX
Central Controller pr
oviding both data and power
AUDIO
• 8-pin 3.5 mm mini-phoenix connector for audio input/output
PROGRAMMING POR
T
• 2.5 mm stereo female conductor jack (side mounted)
POWER
• 770 mA @ 12 VDC
OPERATING ENVIRONMENT
•
Indoor operation at temperatures between 10° C (50° F) to 40° C (104° F)
and a humidity range of 5% to 90% RH (non-condensing)
MEMORY
• 512KB of SRAM and 2MB of Flash for a total memory of 2.5MB
(
2MB is available for buttons, icons, bitmaps, and fonts)
ENCLOSURE
•
BackBox with black matte finish Detachable front panel bezel are available in
White (FG5921-22), Black (FG5921-20) and Almond (FG5921-21)
INCLUDES
• Black, white and beige bezels, for on-site color selection
DIMENSIONS (HWD)
•
Housing: 4.60" x 5.34" x 1.87" (11.68 cm x 13.56 cm x 4.75 cm)
WEIGHT
•
2.23 lbs (1.02 kg)
AXD-CP4A
4" Color Wall/Flush Mount
T
ouch Panel with Audio
F
G5921-23
AC-CP4A/WRB
Water Resistant Bezel Set for AXD-CP4/A
FG5921-24
The Water Resistant Bezel Set for AXD-CP4/A - AC-CP4A/WRB
includes all three colors – white, black, and almond – covered
with a thin transparent water-resistant film to protect the bezel,
including the touch screen, sensor lens and pushbuttons. It also
includes a rubber-foam gasket to "seal" a potential gap
between the bezel and the wall.
CB-CP4/A
Conduit Box for AXD-CP4/A
FG033-10