Specifications

CONFIDENTIAL INFORMATION © 2005 AMX Corporation. All rights reserved. AMX and the AMX logo are registered trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
For more information about AMX products and services visit
www.amx.com
10-05
4" COLOR PASSIVE TOUCH PANELS
Enhanced control capabilities, in a minimum of space, at a price well within your budget. The sleek AXD-CP4/A and AXT-CP4/A 4"
Color Touch Panels boast numerous features: A microphone, speakers, an IR receiver and buttons with LED indicators. This panel fits
in nicely with any décor and provides just the right amount of control and automation.
External programmable buttons are positioned conveniently to the right side of the screen and come with a set of 18 caps that include
two “Up and Down" arrows, 10 pre-printed with labels, as well as six blanks for customization or on-screen graphic user interface
n
avigation. There is less need for custom engraving, and they are also applicable internationally. Sharp graphics, colorful icons and an
ergonomic design welcome you to take control with the effortless press of a button. Intelligent light and motion sensors recognize
when to adjust screen brightness to help eliminate glare and instantly activate the panel or automate the room upon approach.
SCREEN RESOLUTION
• 320 x 240 pixels (HV)
VIEWING ANGLE
• Horizontal viewing angle: -
+
50°
• Ver
tical viewing angle: -
+
50
°
IR RECEPTION AREA
• 45° up on the AXT (30° on the AXD) from the horizontal plane
• 15° down on the AXT (30° on the AXD) from the horizontal plane
• 40
° right of the vertical plane (both AXD and AXT units)
• 40° left of the vertical plane (both AXD and AXT units)
EXTERNAL BUTTONS
• Six interchangeable external pushbuttons; Pushbutton assignments can
include the typical Device/Channel numbers, Flip to Page option and
String/Macro
• Buttons are used as interface tools that operate on-screen menus or turn
On/Of
f the controlled equipment.
EXTERNAL LEDS
• Six LEDs located alongside each external pushbutton, independently
operated and programmed
BUTTONS
•
Set of 18 changeable button caps consisting of: six blanks, two embossed
with Up/Down ar
r
ows and 10 engraved with standar
d icons; these buttons
match the bezel coloring
BUTTON LABELS
•
10 standar
d icon pre-printed buttons
• These buttons contain 10 icons covering the following functions: MENU,
LIGHTS, AUDIO, VIDEO, ENVIRONMENT, SECURITY, INTERCOM, MUTE,
DRAPES and POWER
LIGHT DETECTOR
•
Photosensitive light detector for adjustment of the panel brightness.
MOTION SENSOR
•
Proximity Infrared Detector to wake the panel when the panel is approached
• Activation range: + 20° vertically from center and + 45° horizontally from center
IR RECEIVER
• 38 KHz, 1-way IR reception (of AMX codes only)
MICROPHONE
• Used for audio conferencing applications (intercom functionality)
SPEAKERS
• Frequency response 450 Hz - 7 KHz
AXLINK/POWER
• 4-pin 3.5 mm mini-phoenix connector for communication to the AMX
Central Controller providing both data and power
AUDIO
•
8-pin 3.5 mm mini-phoenix connector for audio input/output
PROGRAMMING PORT
• 2.5 mm stereo female conductor jack (side mounted)
POWER
• 770 mA @ 12 VDC
OPERATING ENVIRONMENT
• Indoor operation at temperatures between 10° C (50° F) to 40° C (104° F)
and a humidity range of 5% to 90% RH (non-condensing)
MEMORY
• 512KB of SRAM and 2MB of Flash for a total memory of 2.5MB
(2MB is available for buttons, icons, bitmaps and fonts)
ENCLOSURE
• Table Top enclosure is available in either Dark Gray (FG5921-30) or Platinum
(FG5921-31)
DIMENSIONS (HWD)
•
T
able T
op unit: 4.22" x 6.24" x 4.99" (10.72 cm x 15.85 mm x 12.67 mm)
WEIGHT
•
2.26 lbs (1.03 kg)
AXT-CP4/A
4" Color Touch Panel with Audio
FG5921-30 DARK GRAY
FG5921-31 PLATINUM