Specifications

CONFIDENTIAL INFORMATION © 2005 AMX Corporation. All rights reserved. AMX and the AMX logo are registered trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
For more information about AMX products and services visit
www.amx.com
10-05
APPLICATION
•
DC power for NetLinx
®
systems, MVP-WDS and CV7 T
ouch Panel
DC POWER OUTPUT
• 13.5 Volts DC, 4.4 Amps
• 3.5 mm phoenix-style plug
• Switching regulated, overload protected
AC POWER INPUT
• 100-240 VAC
• 50-60 Hz
ENCLOSURE
• Molded black matte plastic
• International IEC cable socket
DIMENSIONS (HWD)
• 4.6" x 2.3" x 1.5" (117 mm x 58 mm x 35 mm)
WEIGHT: 1.0 lb (0.45 kg)
PSN4.4
13.5 VDC, 4.4 Power Supply,
with 3.5mm Phoenix Connector
(regulated 110/220 VAC input)
FG423-45
PS4.4
13.5 VDC, 4.4 Power Supply,
with 6mm Barrel Connector
(regulated 110/220 VAC input)
FG423-44
A
PPLICATION
• DC power for MVP-7500, MVP-8400 and MVP-TDS
DC POWER OUTPUT
• 13.5 Volts DC, 4.4 Amps
•
6mm Coaxial barrel-style plug
•
Switching regulated, overload protected
AC POWER INPUT
•
100-240 VAC
• 50-60 Hz
ENCLOSURE
•
Molded black matte plastic
• International IEC cable socket
DIMENSIONS (HWD)
• 4.6" x 2.3" x 1.5" (117 mm x 58 mm x 35 mm)
WEIGHT: 1.0 lb (0.45 kg)
MODERO VIEWPOINT ACCESSORIES
The NXA-WAP2410A can be used to bridge antennas between two
networks or for point-to-point communications. It is field adjustable
for vertical or horizontal polarization with matched principal plane
beamwidths for optimum performance in either orientations. This
design also provides improved front-to-back ratio and sidelobe
suppression that reduces interference. All models feature a robust
mounting structure for consistent performance regardless of
weather conditions.
The NXA-WAP2410A antenna beams a wireless signal from a main
residence to smaller structures located on the property, where
wireless control is desired. The same concept applies for the
corporate environment, where remote locations on a campus may
need wireless networking.
STANDARD FEATURES
• 10 dBi directional antenna
• A 30 dB front-to-back ratio permits less physical separation on the tower,
thus adding mounting flexibility at installation sites where space is limited
• Attractive weather-proof radome is constr
ucted of UV r
esistant material; This
construction pr
ovides r
obust and tr
ouble-fr
ee use in harsh outdoor environments
• Field adjustability allows for both vertical or horizontal polarity; This feature
eliminates co-channel interfer
ence fr
om neighboring radiators
• Includes a robust mast mount bracket which is designed to withstand up to
125 mph winds
• Matched principal plane beam widths provide excellent side lobe
suppression and cross-polarization rejection of more than 20 dB
• Provides superior signal quality (with enhanced gain performance) and
minimal interference from neighboring radiators
• Polarity markings are molded onto the antenna and ensure installation in the
cor
r
ect orientation
• Small and unobtrusive 4.5" x 3" design enables a user to bridge any two
buildings without compromising the architecture
RANGE: 2400-2485 MHz
WEIGHT: 1.0 lb (0.5 kg)
DIMENSIONS (L & OD): 4.5" L x 3.0" OD (114 mm x 76 mm)
OPTIONAL ACCESSORIES
• NXA-WAP10C: 10' RG-58 Plenum Antenna Extension Cable FG2255-26
NXA-WAP2410A
Outdoor Enclosed Yagi Antenna
FG2255-23
NXA-CFSP128M
128MB Compact Flash upgrade for CV5, CV7, CV10 and MVP
FG2116-36
NXA-CFSP256M
256MB Compact Flash upgrade for CV5, CV7, CV10 and MVP
FG2116-37
NXA-CFSP512M
512MB Compact Flash upgrade for CV5, CV7, CV10 and MVP
FG2116-38
NXA-CFSP1G
1G Compact Flash upgrade for CV5, CV7, CV10 and MVP
FG2116-39
CC-USB
MVP/CV7 USB Programming Cable
FG10-5965
CB-MVPWDS
Conduit Box for MVP Wall/Flush Mount Docking Station
FG037-10