Specifications

CONFIDENTIAL INFORMA
TION © 2005 AMX Corporation. All rights r
eser
ved. AMX and the AMX logo are registered trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
For more information about AMX pr
oducts and services visit
www
.amx.com
10-05
At less than two inches in height, the Modero Battery Base
seamlessly attaches to the base of the 12", 15" and 17"
Widescreen Modero Touch Panels, complementing their award-
w
inning design. From here, the Modero Touch Panel can
provide up to eight hours of normal operation. The interface
connector transfers power from the battery base, which houses
two NXT-BP rechargeable Lithium-Ion "smart" batteries and
communicates battery status back to the panel. The NXA-
BASE/B requires the latest version of TPDesign4 (TPD4) to
access the battery setup pages on the Modero Touch Panel. The
latest version of TPD4 can be downloaded from the AMX
Website (www.amx.com).
STANDARD FEATURES
•
Comes complete with two NXT-BP batteries
•
Seamlessly attaches to the base of the 12", 15" and 17" Widescreen
Modero Touch Panels
CONNECTORS
• Battery Interface: Two 5-pin connectors in battery tray
• Modero Interface: 40-pin connector that provides power and status
information to the Modero Touch Panel
NXA-BASE/B KIT
Battery Base Kit for Modero
Touch Panels
FG2255K
The NXA-BASE/1 Batter
y Base pr
ovides both power and batter
y
information to the panel through the panel's interface
connector. The battery base allows both the 7" and 10" Modero
Widescreen Panels to run off the charge from a single internally
connected NXT-BP Modero Power Pack. The NXT-BP battery can
be charged through either the base (only when connected to
the 7" Modeo W
idescr
een T
able T
op version) or thr
ough an
optional NXT-CHG Modero Power Station. When used with the
optional battery base, the 7" panel will charge the battery
during full operation.
STANDARD FEATURES
•
Char
ge cur
r
ent 2.4A @ 12 VDC
•
Char
ge time for one depleted battery ~ five to eight hours
• The Modero unit plus battery base requires a PSN4.4 power supply
NXA-BASE/1 KIT
7" and 10" Widescreen
Modero Battery Base Kit
FG2255-05K
For added convenience, the NXT-BP Modero Power Pack
b
atteries can be quick-charged with the NXT-CHG Modero Power
Station. The power station is a two-slot, stand-alone unit that
r
echarges up to two "smart" batteries, using sequential charging
and recalibration techniques. Through sequential charging, the
batteries placed in each slot are recharged one at a time.
Through recalibration, each battery can be completely discharged
and immediately recharged. This unique feature extends the life
of each battery. Recalibration also improves the accuracy of the
battery charge reading located on each battery, as well as
feedback listed on the Modero Touch Panels’ on-screen Battery
Base page. Instantly track the life of each battery to determine
the amount of time available for touch panel operation.
STANDARD FEATURES
• Comes complete with two NXT-BP batteries
• Recharges a set of NXT-BP batteries in approximately four hours
CONNECTORS
• Power In: Power from Power Station’s Power Supply barrel connector.
• Battery Interface: Two 5-pin connectors; one in each charging slot
NXT-CHG KIT
Quick Charger Kit for Modero Touch Panels
F
G2250-50K
MODERO TOUCH PANEL ACCESSORIES
CC-USB
Programming Cable
FG10-5965
APPLICATION
• Connects a PC's USB port to the MVP-7500, MVP-8400, CV7, CV10 and
Modero V/VG Series Touch Panels
• Used to transfer firmware kit files, TPD4 touch panel files and IR files