Specifications

The AXB-SLD contr
ols the for
ward, reverse, focus and power
functions of any Kodak Ektagraphic
®
or compatible slide
projector.
CONTROL PORTS
• Four relays, configured for forward/reverse, and compatible with EC-3
remote for focus-in and focus-out
• Switched power receptacle for up to 1200 W, 120 VAC
INCLUDES
• Front-panel device address switches and status LEDs
• Front-panel on/off control button
• One Kodak-style EBY projector control cable
ENCLOSURE
• Metal with black matte finish
DIMENSIONS (HWD)
• 1.51" x 5.55" x 5.45" (38.35 mm x 140.97 mm x 138.43 mm)
WEIGHT
• 1.6 lbs (737 g)
OPTIONAL ACCESSORIES
• AC-RK Accessory Rack Kit FG515
T
he AXB-VOL3 controls three audio volume channels. Each line-
level channel, opto-isolated from system ground, can be
configured for balanced or unbalanced line operation. It is
programmable for 128 steps of audio level, audio mute, variable
ramp speed and level presets.
AUDIO PORTS
• Three independent line-level audio in and out ports, balanced or unbalanced
• THD of less than 0.008%, -72 dB at full attenuation (mute)
INCLUDES
•
Front-panel setup switches and status LEDs
• Resistors for 600 ohm termination
ENCLOSURE
• Metal with black matte finish
DIMENSIONS (HWD)
• 1.51" x 5.45" x 5.45" (38.4 mm x 141 mm x 138.4 mm)
WEIGHT
• 1.1 lbs (499 g)
OPTIONAL ACCESSORIES
• AC-RK Accessor
y Rack Kit
FG515
T
he AXB-TMX+ provides the same features as the AXB-TMC,
but without the clock display. The built-in RS-232 port of the
AXB-TMX+ can take control of local switchers, projectors and
other electronic sources. It can also be used for direct, external
RS-232 control in non-AXLink applications.
CONTROL PORTS
• One IR port, with connections for IR emitter or IR/serial
• One RS-232 port (300-38,400 baud), external DB-9 male connector
• Four TTL input/output channels
• Digital frequency scan sensing, from 15-65 kHz
•
Internal high- and low-frequency (455 kHz or 38 kHz) IR sensors
f
or Axcess IR panels
•
Data input for remote Axcess IRX- sensors
INCLUDES
• Front-panel status LEDs
• Protected setup switches (covered by right side bracket)
• Programmable response status LED
• External frequency scan sensor
• CC-IRC emitter
ENCLOSURE
• Metal with black matte finish
DIMENSIONS (HWD)
• 1.74" x 4.06" x 10.63" (44.2 mm x 103.1 mm x 270 mm)
WEIGHT
• 1.0 lbs (453.5 g)
OPTIONAL ACCESSORIES
• PCS2 Dual Power Current Sensor FG427
• VSS2 Video Sync Sensor FG5916-10
• IRX-SM+ or IRX-SD+ IR sensor increase coverage FG455-017
• TMX-RK+ Rack Kit FG522
•
TMX-CB Cable Security Bracket
FG524
• TMX-SM Flush Mounting Kit FG523
• CC-SER IR Serial Cable
•
CC-232 RS-232 Control Cable
AUDIO CONTROLLERSDATA CONTROLLERS
CONFIDENTIAL INFORMATION © 2005 AMX Corporation. All rights reserved. AMX and the AMX logo are registered trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
For more information about AMX products and services visit
www.amx.com
10-05
AXB-TMX+
T
elevision Manager
FG689
AXB-VOL3
3-Channel Volume Controller
F
G5756
AXB-SLD
Slide Controller
FG5777-10