Specifications

The AXB-DTMF+ provides a compete telephone control
interface for AMX systems. In addition to the transmission and
reception of DTMF tones, the unit can detect whether the line
o
r extension phone is off-hook, recognize distinctive ring
patterns, check for incoming calls, and monitor Caller ID data.
CONTROL POR
TS
•
Phone line RJ-11 jack, extension line RJ-11 jack
• RCA unbalanced line-level audio in and out with input level adjustment
INCLUDES
• F
r
ont-panel setup switches and status LEDs
• M
icr
o-jumpers for auto-answer mode and line type
ENCLOSURE: M
etal with black matte finish
DIMENSIONS (HWD)
• 1.51" x 5.55" x 6.45" (38.4 mm x 141 mm x 163.8 mm)
WEIGHT: 1
lb (454 g)
OPTIONAL ACCESSORIES
• AC-RK Accessory Rack Kit FG515
The AXB-IRS4 operates as an AXLink bus device or as an
independent RS-232-to-IR interface. The four IR ports can be set
up for IR or wired serial operation. Any two ports can send
commands at the same time; internal firmware stacks any
remaining IR pulses and executes them in sequence. Each unit
emulates four AXLink devices.
CONTROL PORTS
• Four IR/serial ports
•
One AXLink or one RS-232 port (300–19,200 baud) to receive
exter
nal control commands
INCLUDES
• Battery-backed IR memory, up to 200 commands per port
• Front-panel setup switches and status LEDs
• Two CC-IRC or CC-SER emitters
ENCLOSURE: Metal with black matte finish
DIMENSIONS (HWD)
• 1.5" x 5.5" x 5.5" (38 mm x 140 mm x 140 mm)
WEIGHT: 1.1 lbs (499 g)
OPTIONAL ACCESSORIES
• AC-RK Accessory Rack Kit FG515
The AXB-DMX512 cr
eates a bi-dir
ectional DMX512-to-AXLink
connection, transmitting and r
eceiving up to 512 DMX channels.
Onboard processing and memory create as many as 96 channel
groups, eight faders, and 72 presets (284 by adding extended
memory), as well as soft-patch channels. A DMX lighting board
can operate in tandem with the AXB-DMX512, generate levels
for storing presets, or bypass the AXB-DMX512 for direct control
of channels.
CONTROL PORTS
• DMX512 transmit and receive
INCLUDES
• Front-panel setup switches and status LEDs
• Internal jumper select AXLink or RS-232 operation
ENCLOSURE: Metal with black matte finish
DIMENSIONS (HWD)
• 1.51" x 5.55" x 5.45" (38.4 mm x 141 mm x 138.4 mm)
WEIGHT: 1.1 lbs (499 g)
OPTIONAL ACCESSORIES
• AC-RK Accessory Rack Kit FG515
While this controller can serve as a conventional RS-232/422
control port, it is also able to run its own Axcess application
program – an exclusive AMX product feature. Source specific
programming, such as video switchers, laserdisc players and
video codecs, can be handled by the AXB-232++ to deliver a
modular solution for system programming.
CONTROL PORT
•
R
S-232/422/485 port (300-115,200 baud), XON/XOFF, CTS/RTS
BUFFERS
•
1,000 byte serial input buffer; 1,000 byte AXLink buffer
INDICATORS
• Three status LEDs indicate transmit, receive, and AXLink
ENCLOSURE: Metal with black matte finish
DIMENSIONS (HWD)
• 1
.51" x 5.55" x 5.45" (38 mm x 140 mm x 140 mm)
WEIGHT: 1.1 lbs (499 g)
OPTIONAL ACCESSORIES
• AC-RK Accessor
y Rack Kit
FG515
• CC-232 Control Cable
DATA CONTROLLERS
CONFIDENTIAL INFORMA
TION © 2005 AMX Corporation. All rights r
eser
ved. AMX and the AMX logo are registered trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
For more information about AMX pr
oducts and services visit
www
.amx.com
10-05
AXB-232++
RS-232/422 Interface
(enhanced functionality)
FG5761-10
AXB-DMX512
DMX512 Interface
FG5927
AXB-DTMF+
DTMF Interface
FG946
AXB-IRS4
IR/Serial Interface, 4 Ports
FG5914