Specifications

Electronic Modules Ver. 0002 EM - 23
Axis Compact Drive
(Note 1)
Spindle Compact Drive
(Note 2)
ACD
1.08
ACD
1.15
ACD
1.25
ACD
2.50
ACD
2.75
SCD
1.08
SCD
1.15
SCD
1.25
SCD
2.50
SCD
2.75
Rated current (Amp)
4 7,5 12,5 25 37,5
Maximum peak current for 500ms in cycles longer
than 10 seconds.
815255075
Maximum current in any duty (Note 3)
5,6 10,6 17,7 35,4 53
Power supply
Three-phase mains 50/60 Hz,
with a voltage range between 380Vac -15%. and 460Vac + 10%
Internal power bus voltage. 540-650- Vdc
Filter capacity
330 µF, 800 Vdc
705 µF,
800 Vdc
330 µF, 800 Vdc
705 µF,
800 Vdc
Energy stored in the capacitors.
0.5 · C · V
2
Internal Ballast resistor
-Ohms- (Power -W-)
82
(60)
41
(120)
23
(210)
12
(240)
8.2
(240)
82
(60)
41
(120)
23
(210)
12
(240)
8.2
(240)
Ener
g
y pulse that can be dissipated. -kWs-
(Pulse duration -sec-)
1
(0.45)
2
(0.4)
3.6
(0.45)
12
(0.7)
12
(0.5)
1
(0.45)
2
(0.4)
3.6
(0.45)
12
(0.7)
12
(0.5)
Ballast circuit ON/OFF 764 Vdc / 756 Vdc
Minimum external Ballast Res. -Ohms-
82 41 23 12 8.2 82 41 23 12 8.2
Feedback
Encoder /Resolver Encoder
Control method PWM, sinewave AC, Vector Control
Communications Serial line to connect to a PC or to the Programming Module
Interface Standard analog, or digital via SERCOS
Status display 7 - segment display
Speed range with analog input
1:8192
Current bandwidth
800 Hz
Velocity bandwidth 100 Hz (Depends on the motor/drive combination)
Protections
Overvoltage, Overcurrent, overspeed, heat-sink temperature, ambient
temperature, motor temperature, Ballast temperature, Hardware error, overload.
See appendix E.
Notes:
1.- Drives for synchronous motors 2.- Drives for asynchronous motors
3.- This current must be equal to or greater than that of the corresponding spindle motor in S6.
Power for Internal circuits (24 Vdc)
Input voltage (X1 connector) Between 380Vac (-15%) and 460Vac (+10%); 50/60Hz
Mains consumption
160 mA (380 Vac), 130 mA (460 Vac)
Bus consumption 112 mA (540 Vdc), 92 mA (650 Vdc)
Maximum voltage at the Bus 780 Vdc
Output voltage, maximum current 24 Vdc (5%), 110 miliAmp. (X2 connector, pins 1 and 2)
Ambient conditions
Ambient temperature
5°C / 45°C. (41°F / 113°F)
From 40°C (104°F) See Derating tables
Storage temperature -20°C / +60°C (-4°F / +140°F)
Maximum humidity Less than 95% (non condensing at 45°C / 113°F)
Vibration while running
10..60 Hz, 0.1..5 G, 2 hr
Vibration while shipping
60..300 Hz, 5 G, 2 hr
Sealing
IP2x
Weight. Kg (lbs)
8.3 (18.4) 13.2 (29.3) 8.3 (18.4) 13.2 (29.3)