Specifications

EM - 22 Electronic Modules Ver. 0002
11.4
°C (°F)
Current
S1 (Amp)
45 (113)
12.5
55 (131)
ACD 1.25 ACD 2.50
ACD 2.75 SCD 2.75
24
°C (°F)
Current
S1 (Amp)
50 (122)
25
55 (131)
47.9
°C (°F)
Current
S1 (Amp)
45 (113)
53
55 (131)
27.8
°C (°F)
Current
S1 (Amp)
45 (113)
34.7
55 (131)35 (95)
31.3
ACD 1.15
6.7
°C (°F)
Current
S1 (Amp)
45 (113)
7.5
55 (131)
EM.3 COMPACT DRIVE (AXES AND SPINDLE)
The Fagor Compact Drive has its own power supply and it can be connected directly to Mains.
Its behavior, functionality and parameters are the same as those of the Modular Drive.
EM.3.1 GENERAL CHARACTERISTICS
See the table on the next page,
EM.3.2 DERATING, COMPACT DRIVES
The following graphs show the maximum rms current in continuous duty cycle offered by the
various compact drives depending on ambient temperature.
Fagor ACD 2.75 compact drives for synchronous motors offer an rms current of up to 34.7
Amps and Fagor SCD 2.75 compact drives for asynchronous motors 53 Amps.
Models ACD 1.08, SCD 1.08, SCD 1.15, SCD 1.25 and SCD 2.50, maintain their best
characteristics, indicated in the previous table, in the full range of temperatures between 5 °C
and 55 °C (between 41 °F and 131 °F).
Axis Compact Drives:
They can supply twice as much current for a
maximum of 0.5 seconds and always in
cycles longer than 10 seconds.
Spindle Compact Drives:
The compact drive can supply the indicated
current in any duty cycle.