Specifications

Compatibility Ver. 0002 D - 3
Replacing a 380 Vac module with a 460Vac module:
New drive "MSC 12A".
New capacitor module "01A".
New Auxiliary Power Supply APS 24 "PF 05A".
They may be incorporated into any servo drive system regardless of its power
supply.
New power supply "PS-xxA".
If the system includes any element for a mains voltage of 380 Vac:
An "MSC 11A" drive, or an APS 24 power supply "PF 04A", or a Capacitor module
CM-60 "00A" it needs a "PS-xx" power supply.
(the "PS-xx" is nothing but a "PS-xxA" factory limited to work at 380 Vac)
It will take a mains voltage limited to 380 Vac.
Obviously, if the system includes only "MSC 12A" drives, there is no problem.
It will take a mains voltage range of 380-460 Vac.
New Power Supply PS-25B.
If the system includes an element for a Mains voltage of 380 Vac:
an "MSC 11A" drive or a Capacitor module CM-60 "00A", the PS-25B must be set
up to work at 380 Vac.
It will admit a Mains voltage limited to 380 Vac.
Note: The new Compact Drives (version MSC 05A and later) are designed to also run at 380-
460 Vac but they have no compatibility problems with previous equipment.
2. VECON BOARD 03A - SOFTWARE 03.03
The new Vecon board version (03A) expands the capacity of its Flash memory and improves
the Flash and RAM memory speed.
This improved Vecon board is related to software version v03.03.
This board (VEC 03A) is incompatible with software version 03.02 and older.
However, the software version 03.03 is compatible with Vecon board versions older than VEC
03A.
3. 03A VECON BOARD - SOFTWARE MC+PLC
Software version v04.01 includes the options of Motion control (MC) and PLC.
This v04.01 option is compatible with Vecon boards with versions older than VEC 03A, but:
The Motion Control (MC) and PLC implemented in version v04.01 require a Vecon
board version VEC 03A.