Specifications

A - 30 Parameters, Variables and Commands Ver. 0002
NP123 O (S123) FeedConstant
Function: They define the linear movement of the machine and the axis moving it. For example,
if the table moves 4 mm for every turn of the ballscrew. This parameter should be set
as S123 = 40000
In the case of a rotary axis, NP123 = 3600000, (360 degrees per turn)
Valid values: 1..214 m
Default values: 5000 microns (5 mm per turn)
NP165 O (S165) DistanceCodedReferenceMarksA
Function: When the linear scale has distance-coded reference marks, this parameter indicates
the distance between two "coded" consecutive reference marks . For example, for
Fagor glass scales, it is 20.02 mm.
Valid values: 1001, 2002
Default values: 1001
NP166 O (S166) DistanceCodedReferenceMarksB
Function: When the linear scale has distance-coded reference marks, this parameter indicates
the distance between two consecutive reference marks. For example, for Fagor glass
scales, it is 20 mm.
Valid values: 1000, 2000
Default values: 1000
NV31 (S301) RealTimeControlBit1IDN
NV33 (S303) RealTimeControlBit2IDN
NV35 (S305) RealTimeStatusBit1IDN
NV37 (S307) RealTimeStatusBit2IDN
Function: Internal system variables.