Specifications

A - 28 Parameters, Variables and Commands Ver. 0002
MP12 FMA (F1208) MotorNominalPower
Function: Nominal Power.
Valid values: 1..2000 tenths of Kw.
MP13 FM (F1209) MotorThermalTimeConstant
Function: Motor Thermal Time Constant.
Valid values: 1..200 minutes.
MP14 FM (F1210) MotorTempSensorType
Function: Identifies the sensor of the Fagor motor
Valid values: 0 - SPM and FXM: Triple, sensitive between 130°C and 160°C
1 - AXM: Simple, sensitive between 0 and 155 ºC
MP15 FM (F1211) MotorShaft
Function: Offers information about the shaft type installed on the motor.
On FXM motors:
MP15 = 0 means that the shaft has a standard keyway
MP15 = 1 means that it does not have a keyway.
On SPM motors:
MP15 = 0 means that it is a normal shaft.
MP15 = 1 means that the shaft is sealed (against oil from the gear box).
MP15 = 2..9 it is a special shaft supplied upon request.
MP16 FM (F1212) MotorBrake
Function: It indicates whether the motor has a brake (MP16 = 1) or not (MP16 = 0).
MP17 FM (F1213) MotorFan
Function: It indicates whether the motor has a fan (MP17 = 1) or not (MP17 = 0).
It only makes sense on FXM motors because the SPM motors always carry a fan.
MP18 FMA (F1214) MotorMounting
Function: It indicates how the SPM motor is mounted. The roller bearings of that motor will be
designed for that particular way of mounting.
MP18 = 0 for a horizontal mount B3/B5
MP18 = 1 for a vertical mount with the shaft facing down V1/V5
MP18 = 2 for a vertical mount with the shaft facing up V3/V6
MP19 FMA (F1215) MotorBalancing
Function: It indicates the balancing degree of the motor.
MP19 = 0 -> standard "degree: "S"..
MP19 = 1 -> better balancing degree: SR.
MP20 FMA (F1216) MotorBearings
Function: It indicates the type of roller bearings.
MP20 = 0 -> normal bearings.
MP20 = 1 -> high speed bearings.
MP22 FMA (F1218) MotorPowerReduction
Function: Limits the maximum power of an asynchronous motor.
Valid values: 0..100%
Default value:: 100%
MP24 FM (F1220) MotorMomentumOfInertia
Function: Motor inertia.
Valid values: 1..10000 Kgr/cm
2
Default value: 10 Kgr/cm
2