Specifications

A - 22 Parameters, Variables and Commands Ver. 0002
GV37 (F2012) PlcErrors
Function: When the PLC indicates through the display Status a compiling or execution error,
this variable indicates its exact meaning. See PLC manual.
GC1 (S264) BackupWorkingMemoryCommand
Function: Transfers parameters contained in RAM memory to Flash memory. Available on the
command menu of the programming module "DDS PROG MODULE" as
BackupWorkMemoryProcedureCommand.
GC2 (S216) ParameterSetSwitch
Function: Execution of the change of ranges and parameter Sets.
8. HARDWARE GROUP “H”
HV1 (S110) DrivePeakCurrent
Function: Identifies the power of the Drive module (Peak current for an FXM)
Valid values: 8, 15, 25, 35, 50, 75, 100, 150
HV9 (F806) ModularOrCompact
Function: Shows whether the Drive is modular or compact.
Valid values: 0-Modular 1-Compact
HV10 (F290) VsMSC
Function: It informs of the different hardware possibilities.
HV11 (F291) FlashManufacturerCode
Function: Indicates the code of the manufacturer of the flash memories used in the drive.