Specifications

GSU - 4 Common Setup Ver. 0002
GSU.4 ACCESS LEVELS
A parameter table determines the operation of the Drive depending on the motor it governs
and on the desired behavior.
All these parameters, variables and commands of the Drive are organized by access levels.
These levels are: 1.- USER level.
2.- OEM level. 3.- FAGOR level
To access each parameter, the drive must be set up at the access level required by that
parameter. See appendix A.
The access to each level requires a password.
To change the access level from the WinDDSSetup program, execute the "Access Level"
option on the "SetUp" menu. The bottom of the screen shows the currently active level.
The USER level is the basic level. On power up, the Drive access this level by default, thus
not requiring password.
At USER level, it is possible to access a group of parameters that slightly modify the
behavior of the Drive depending on the application developed.
(Free access).
The OEM level is an intermediate access level. Appendix A describes which variables,
parameters and commands may be accessed from this level.
At OEM level, it is possible to access a large group of parameters depending on the
motor being connected which set how the electronics of the Drive is adapted to that
particular motor and to the particular application being developed. (Access restricted to
the Fagor Servo Drive System installer).
The FAGOR level allows full access to all system variables, parameters and commands.
At Fagor level, it is possible to access a group of parameters depending on the
electronics of the drive and that are factory sets. (Access restricted to the manufacturing
process and technicians from Fagor Automation).