Specifications

Common Setup Ver. 0002 GSU - 3
GSU.3 WINDDSSETUP
With the Fagor program WinDDSSetup (Windows based) it is possible to set up the Drive
through the serial line.
To install this program at the PC, execute setup.exe which comes in Floppy Disk number 1
of the DDS-SETUP.
Important:
The minimum PC hardware requirements for the proper operation of the
WinDDSsetup are:
486 microprocessor at 66 MHz and 16 Mb of RAM.
It may also be adjusted from the portable Programming Module "DDS PROG MODULE"
although with fewer choices than those offered by the PC program.