Specifications

IN - 20 Installation Ver. 0002
IN.6 CONTROL POWER SUPPLY FOR THE MODULES
The internal circuits of all electronic modules need 24 Vdc.
The PS-25A and PS-65A power supply modules and modular Drives must be supplied with
this voltage through their X2 connector.
These modules have stabilizing system for the supplied voltage.
The maximum consumption of each module is: PS Power Supply .... 1 Amp.
Modular Drive ............2 Amps.
Important:
The 24 Vdc voltage supply is essential for the system to run.
The APS 24 auxiliary power supply offers these 24 Vdc and 10 Amp.
Regenerative power supplies XPS-25 and XPS-65 and the PS-25B power supply are self-
supplied and they also offer 8 Amps of these 24Vdc.
Compact Drives are self-supplied and offer up to 110 mA of these 24 Vdc.
Important:
All these 24 Vdc power supplies assure the presence of this voltage as long as the motor
braking lasts due to mains power outage.
This is a must for obtaining the "CE seal" for the machine.
These 24 Vdc can also be used in the circuit of the electrical cabinet, but
NEVER to activate the brake of a motor.
Connection of the APS power supply.
X2
1
10
(Phoenix,
5.08mm)
(Phoenix,
5.08 mm)
1
3
X3
X2
1
8
(Phoenix,
5.08mm)
1
3
(Phoenix,
7.62 mm)
X1
L2
L1
Mains
97
X2
1
8
(Phoenix,
5.08mm)
7
+24 Vdc
0 Vdc
APS 24
DRIVES......
PS
X2 X4