Specifications

AMX Novara DCS1000 Device Configuration Software
51
Novara ControlPads & KeyPads
Alternatively, use the Auto Tune feature to transmit a range of frequencies one at a time: Click Auto Tune and wait to see
if the device responds. If not, click Auto Tune again. Repeat until the device responds. When the device responds, then
Save the edit:
Click Save Edit For Whole Device to save the edit for all of the Device Functions.
Click Save Edit Function Only to save the edit on the selected function only.
Input Port Scripts
A script can be executed when a High to Low or Low to High state is detected on the Input Port. This is useful for
external detection of a switch or PIR.
To write a script for the Input Port:
1. Click on either of the Input Port buttons in the System window (FIG. 87).
2. Write a script as normal.
When the configured Input Port state is detected, the script will execute.
If the ControlPad is busy when the state change occurs, the script will execute when the ControlPad is free.
To return to the button list, select Button > Press from the menu bar.
Changing a Button Action
Button action can be changed via options in the Button menu (in the menu bar). Four options are available:
Press
A script is programmed for a button press.
Release
A script is programmed when a button is pressed then released.
Toggle
Up to four different scripts can be written for a button, using the Toggl e option in the Button menu:
FIG. 85 AMX Library Files dialog - Edit IR Data
FIG. 86 AMX Library Files dialog - decreasing Frequency and Pulses/Bit values
FIG. 87 Input Port buttons