Instruction manual

CONTENTS 4
ELECTRICITY SUPPLY
Before connecting this apparatus to the electricity supply, check the information given
on the rating plate and ensure that;
A) Your supply is single phase AC (alternating current) of the stated frequency with
neutral nominally at earth potential.
B) Your supply voltage is within the stated range.
C) The current rating is within the capacity of your outlet.
D) Your plug or electricity supply circuit is fitted with a suitable fuse.
Fuse rating 230v 110v - 120v
13 amp 15 amp
WARNING! This apparatus must be earthed.
The wires in the mains lead are coloured in accordance with the following code;
230v 110v - 120v
Live Brown Black
Neutral Blue White
Earth Green and Yellow Green
Connect the wires to a non-reversible 3-pin plug as follows:
Green and Yellow or Green to terminal marked E (Earth), G (Ground), coloured Green
or Green and Yellow or marked with the Earth symbol.
Blue or white wire to terminal marked N (Neutral) or Common or coloured Blue.
Brown or black wire to terminal marked L (Live) or Phase or coloured brown.
Note: 110v - 120v installations to comply with National and State Wiring Codes.
IMPORTANT Consult an electrician if in any doubt or if your supply system has any of
the following:
No earth
A colour code different from above
Reversible plugs
Supply and return leads that are both above earth potential.