Instruction manual

THE CONTROL PANEL 16
4. THE DISPLAY AND CONTROL PANEL
The displays and keys on the control panel are labelled as follows:-
1. Run time display
2. Speed/RCF display - when displaying RCF values a point will be displayed
in the bottom right hand corner
3. *Temp display
4. Accel/brake rate display
(Accel rate is only displayed when the value is set and while accelerating)
5. Status display
6. Run time key
7. Time hold key
8. Speed key
9. RCF key
10. *Temp key
11. *Pre cool key
12. Accel / brake rate key
13. Rotor start key
14. Rotor stop key
15. Numerical keys (for time, speed etc.)
16. Minus/code key
17. Cancel entry key
*Applies to Refrigerated models only
Figure 7 The display and control panel