User Guide

Programming
3
AXC-IR/S Infrared/Serial Card
Programming
The AXC-IR/S uses Axcess programming. For more information, refer to the Axcess Programming
Language instruction manual.
Channel definitions are as follows:
1 - 128 Generates infrared and serial code for the corresponding function.
Send_Command Functions
Send_Commands
INITIR
Initializes EEPROM for 8 fixed IR functions; functions 2, 4, 6, and 8 have no carrier.
CAROFF
Overrides and turns off the carrier on all outgoing functions.
CARON Restores the carrier to normal as described by its function (default)
IROFF
Turns off the transmission of IR code if any is in progress.