Datasheet
724-746-5500 blackbox.com
BL A C K B O X
®
4 of 9
05/12/2010
#26549
from a local network running a DHCP/BOOTP server.
Plus the included COM redirect software provides fixed TTY
or COM ports so server-based applications can communicate
accurately with serial devices in encrypted or clear text modes.
Manage via the network, a browser, or a serial link.
Secure Device Servers
are easy to configure and manage. You can
use the included Device Management software, a Windows based
configuration tool, that connects via an Ethernet link. This software
gives you a way to control multiple device servers from a central site
and ensures maximum uptime for your remote equipment. Assign
an IP address to new device servers, update firmware, create
configuration files, view statistics, and more with the software.
Or connect via a Web browser using its included WebManager
software. You just open your browser and type in the IP address
of the device server that you want to manage/configure.
You can also connect directly via a serial port using a serial
terminal or terminal emulation software, through a modem
connection to the serial port (PPP/SLIP configured for remote access
by a Telnet session), or from the network through the Ethernet
interface using reverse Telnet or reverse SSH.
Port buffering features enable you to capture and hold local
and remote serial port activity in memory for viewing and
troubleshooting at a later stage without affecting the normal
operation of the serial ports.
The device servers also support SNMP for integration into
managed networks.
No power outlets nearby? No problem.
Need to set up serial port connections in out-of-the-way areas
without nearby AC power outlets? Then order the Power over
Ethernet (PoE) models. They operate as powered devices (PDs)
according to IEEE 802.3af PoE specifications and support connections
to 802.3af-compliant end-span and mid-span power source
equipment (PSE). Operating as PDs, the PoE
Secure Device Servers
draw up to 13 watts of DC power via UTP data cables connected
on the Ethernet side instead of from power cords. PSE power can
be through two unused twisted-pair wires (on 10 /100 Mbps only)
or through two “phantom power” data pairs (100 Mbps).
The PoE models also feature inrush current protection that guards
against input current surges that may occur during powerup. The PoE
10/100 Secure Device Servers
begin with a low current draw stage,
then switch to a high-current stage to allow them to draw their
required power up to a maximum of 12.95 watts.
10/100 Secure Device Servers (CONTINUED)
Models available with a built-in dial-up modem.
For remote and Internet access, you can attach the device servers
to a modem. Or you can just order the models with an integrated
V.92/V.90 data modem built in! These dialup models support PPP
connections, and the onboard RJ-11 modem connection provides a
more secure and reliable link to the POTS network than other dongle-
style RJ-11 or RJ-45 modems available.
All
10/100 Secure Device Servers
support virtual modem links
between two device servers on a network or between a ter minal server
and a host. With a
10/100 Secure Device Server
at each end of the link,
there’s no need for multiple modems in your application.
They also can be used for serial tunneling, in which two device
servers are connected back-to-back over Ethernet to virtually link two
serial ports.
Item Code
10/100 Secure Device Servers, RS-232/422/485
1-Port DB9 Male U.S. Power Cord
LES5011A
U.K. Power Cord
LES5011E-UK
European Power Cord
LES5011E
DB25 Male U.S. Power Cord
LES5012A
U.K. Power Cord
LES5012E-UK
European Power Cord
LES5012E
DB25 Female U.S. Power Cord
LES5013A
U.K. Power Cord
LES5013E-UK
European Power Cord
LES5013E
RJ-45 U.S. Power Cord
LES5014A
U.K. Power Cord
LES5014E-UK
European Power Cord
LES5014E
RJ-45, PoE U.S. Power Cord
LES5015A
U.K. Power Cord
LES5015E-UK
European Power Cord
LES5015E
1-Port with Modem
RJ-45 U.S. Power Cord
LES5016A
U.K. Power Cord
LEE9011E-UK
European Power Cord
LEE9011E
2-Port RJ-45 U.S. Power Cord
LES5024A
U.K. Power Cord
LEE9024E-UK
European Power Cord
LEE9024E
4-Port RJ-45 U.S. Power Cord
LES5044A
U.K. Power Cord
LEE9044E-UK
European Power Cord
LEE9044E
RJ-45, PoE U.S. Power Cord
LES5045A
U.K. Power Cord
LES5045E-UK
European Power Cord
LES5045E
For DIN-rail mounting options, see page 9.
LES5016A
LES5014A