User manual
Phoenix
32
User Manual www.RealmCtrl.com
80
control modes. When an event launches, the user is initially placed in Keypad
mode, which means the numeric keys may be used, if the source supports
numeric input. By pressing [ALT], the user can toggle into Navigation Mode,
which will cause the “Response” light on the Destination’s Television
Managers to turn on. The Response light may be used as visual confirmation
that a user is in, or out, of Navigation Mode. When in Navigation Mode, the
keypad buttons will function as follows:
• Digit [1] – Select DVD (DVD/VCR Combo only)
• Digit [2] – Navigate Up
• Digit [3] – Select VCR (DVD/VCR Combo only
• Digit [4] – Navigate Left
• Digit [5] – Center/Enter
• Digit [6] – Navigate Right
• Digit [8] – Navigate Down
• [Clear] – Clear
• [Enter] – Enter
• [Chapter] – Root Menu
• [Frame] – Root Menu
Some functions may not be supported by the decks utilized at your facility.
Also, for sources controlled via IR, the functions require that the
corresponding IR codes exist within the appropriate slots (see section 15).
10.1.11.2. Laser Disc Players
• [Alt+9+Enter] – Toggle display
• [Alt+0+Enter] – Flip sides
• [Chapter+[x]+Enter] – Search for chapter [x], where x is 0-99
• [Frame+[x]+Enter] – Search for frame [x], where frame is 0-4,294,967,295
10.1.11.3. CDI Players
• Digit [2] – Up Medium Fast
• Digit [4] – Left Medium Fast
• Digit [5] – Right Medium Fast
• Digit [8] – Down Medium Fast
• [Clear] – Dot
• [Enter] – Dot
• [Chapter] – Dot Dot
• [Frame] – Dot Dot
10.1.11.4. VCR/VHS Players
• [Alt+1+Enter] – Select audio mode
• [Alt+4+Enter] – Track Up
• [Alt+5+Enter] – Track Down
• [Alt+6+Enter] – Reset Counter
• [Alt+7+Enter] – Clear
• [Alt+9+Enter] – Toggle Counter Display
10.2. The G1 Web Client
The G1 Web Client solution is a virtual touch panel that serves up from the NetLinx