User manual

Phoenix
32
User Manual www.RealmCtrl.com
71
Application preferences and miscellaneous properties of the Server application are set
using the Defaults Tab, which is shown below:
Figure 28: The Defaults Tab
Following are descriptions of the various settings available on this tab:
9.5.1. Server Name – this is the “friendly” name that is assigned to the Server. This was
originally implemented primarily for sake of MultiServer, which is obsolete. This
field should be used for general use and will not impact the performance of
Phoenix, regardless of what you name the application.
9.5.2. Minimum Event Setup Time (Min) – the minimum time allowed until an event can be
scheduled. The purpose of this setting is to give the staff of the Media Center time
to see the event on the schedule and then physically load the analog source. As
one would expect, this value does not pertain to digital media events because there
is no need to load a source device.
9.5.3. Event Warning Time (Min) – the time before an event launches during during which
Phoenix will attempt to warn the staff of the Media Center that the device scheduled
for said event has not been loaded. The warning consists of an audible alarm that
will sound on the Phoenix Server computer and a notification to NetLinx that an