User manual

Phoenix
32
User Manual www.RealmCtrl.com
62
associated formats. An example of the Media Tab is shown in Figure 24: The Media
Tab.
Figure 24: The Media Tab
9.1.1. To create a new media title, click [New] and enter the name of the title. You may
also enter additional information as described below. However, that same
information can be entered on the tab itself and so there is no need to enter any
additional data immediately, unless you prefer to enter all data while the New Title
dialog is launched.
9.1.2. After entering the name of the media title, enter the duration of the title within the
“Length” field. This value is defined in minutes and it is used when scheduling if the
[Use Length] checkbox is selected (see section 5).
9.1.3. Add a format to your title within the “Format” section. The format is what Phoenix
uses to associate a title with a source. Each format that you add constitutes a copy
of the media that exists at your facility. For example, if you have two copies of a
specific DVD, you will add two DVD formats. If you have one copy on DVD and
another on VHS then you will create one DVD format and one VHS format for the
same title. It is important to distinguish between the [New] and [Delete] buttons