User manual

Phoenix
32
User Manual www.RealmCtrl.com
60
* Note: Phoenix is not intended as a failsafe mechanism for security purposes.
RealmCtrl specifically disclaims any use of Phoenix for purposes of security as a “use
at your own risk” feature. There are many variables that may cause a Page to fail
including faulty wiring to the Television Manager, missing IR codes, and other
unrelated factors that are outside of our control. RealmCtrl will not be held liable for
any injury that results from the failure of a Page; Phoenix is a Media Retrieval and
Campus Automation solution, not certified or geared towards protection of human
lives.
Figure 23: The Paging Tab
8.9.1. Paging was originally built around a model that made use of the AXU-SPL4 or AXP-
PC Paging Console from AMX Corp. This device included a microphone and four
buttons that allowed control of the Paging system. Phoenix supports the Paging
Console but it also supports Paging via touch panel and web client. This section
will describe configuration of the Paging system but not the end user interfaces,
since they tend to vary greatly according to the needs and preferences of the
facility. If your facility includes the Paging add-on, additional documentation and
training will be provided to explain how to control the Paging system.