User manual

Phoenix
32
User Manual www.RealmCtrl.com
46
ID number, etc.). The title field is limited to 64 characters. Approximately 32
characters will show in the Titles list of the Media tab in the Resource
Management dialog box.
• Description - This field is limited to 511 characters, of you which you will
initially see only 120 characters in the Title Details of the Media tab (use the
scroll bar to see the rest).
• Minutes - This field requires the play time length in minutes of the media
title.
• Seconds - This field requires the number of seconds for the media title.
• Frames - This field requires the number of frames for the media title.
• Subject - This field requires a subject or category description, such as
Biology.
• Field 13 - These fields are limited to 128 characters, of which you will see 32
characters in the Title Details of the Media tab (use the arrow keys to scroll
through and see the rest).
• Format - This field requires a format description, such as VHS. Acceptable
formats are VHS, Beta, LASER CAV, CDI, Camera, 16mm, Photo CD, U-
matic, Slides, Laser CLV, Bar Code CLV, and Mac Computer.
6.4.10. {Pager Setup} – the Pager Setup menu selection will launch a dialog that will
allow entry of data regarding a security pager. This is for use only by facilities that
have purchased an add-on that works in conjunction with the AMX DTMF card to
notify security any time a device falls off the AXlink bus. This can be used to alert
security that a Television Manager or any other AXlink device may have been
stolen. Unless your facility has purchased the Security Pager add-on, this dialog
will have no bearing on the performance of the Phoenix application.
6.5. NetLinx
6.5.1. {Communications} – this menu item will launch the NetLinx Communications &
Diagnostics dialog. From here, you may configure the parameters of the
communication from the Server application to the NetLinx control system and vice
versa. An example of this dialog is shown in Figure 19: The NetLinx
Communications & Diagnostics dialog.