User manual

Phoenix
32
User Manual www.RealmCtrl.com
13
Figure 2: The Sources Tab
4.2.1. The first step in creating a source is to define its name. This name should
correspond to the actual device that is being created. Click the [New] button within
the Sources section of the dialog and enter a source name on the New Source
dialog. There is other information that may be entered on the New Source dialog
as well. However, all of that information is also duplicated on the Sources Tab.
Therefore, you can either fill out the additional information on the present dialog or
you can simply click [Create] and continue to configure your device on the Sources
Tab.
Note: The [Out of Order] checkbox is for use if the device later fails and has been
removed from service. To click this checkbox will remove it from the pool of
sources that are available to schedule. Therefore, it should not be checked when
creating a new source.
4.2.2. Define the format(s) that the source supports. Formats are the types of media that
can play on the source, such as VHS, DVD, etc. One source may support multiple
media types, as in the case of a DVD/VCR combination unit. The format(s) that you
assign to the source will be used by Phoenix to associate a media title with the
source(s) that it can play on. See section 9.1 for more information regarding