User manual

Phoenix
32
User Manual www.RealmCtrl.com
12
read on to understand how to configure the Secure Web Client Dialog…
4.1.4.2. The Secure Web Client add-on allows login restrictions based off a static IP
address. Following is an example of the dialog:
4.1.5. If the Television Manager(s) within the destination that you are defining resides on
the local Head End AXlink then you are done with the configuration of the
destination for now, although you will revisit the tab as the facility configuration
“fleshes out.” For the moment, you should ignore the drop-down labeled “Input
wired to.” However, if the Television Manager resides on the AXlink of a
standalone NetLinx or AXcess system then you will also need to enter the IP
address or RS-232 link to the remote system. For more information regarding
standalone remote systems, see section 11.
Continue defining all destinations in like manner, using the steps within this section
as your guide.
4.2. Define your Sources
Having defined all of your rooms, you are now ready to move on to definition of the
Sources that are available for scheduling and control throughout the campus. Click on
the Sources Tab to proceed with source definition. An example of the Sources Tab is
shown in Figure 2: The Sources Tab.