User manual
Phoenix
32
User Manual www.RealmCtrl.com
106
13.5. Section 3: Keyswitch Paging
Keyswitch paging is configured almost identically to the PA. Follow the same process to
configure the keyswitch paging zones.
To configure the broadcast mode preference, press the button within the Options
section. The button will cycle through three options: [Broadcast PA and TVs],
[Broadcast PA], or [Broadcast TVs]. If TVs are selected then the video will broadcast to
the zone and will display the Broadcast Status page. In that case, do not commence
speaking until the “BROADCAST IS LIVE” prompt is displayed:
13.6. Section 4: Music