User manual

Phoenix
32
User Manual www.RealmCtrl.com
102
The Keymap divides the campus into zones. Each zone contains one or more
rooms. Press the Keymap button to drill down to the rooms that are contained
within the zone:
To add a room to the zone, press the corresponding button so that it turns green.
To remove it from the zone, press the button again so that it turns red. Press
[Select All] to associate all rooms, or [Clear All] to remove all rooms. To configure
the next zone, press [Next >>], or press [Done] and then select the next zone from
the Keymap. Press [Done] on the Keymap when all room associations are
complete. The panel will return to the Bell Settings page and will update the status
with a checkmark if any rooms have been added to the zone.
After the manual sound is fully configured, press [Return] on the Bell Settings page.
The panel will return to main Bell Schedule page.
13.3.2. Play a manual bell
To play a bell manually, select the manual bell and then press [Activate]. The bell
will play to the room(s) within the zone map. The bell must be fully configured with
an associated sound and included rooms before it will function.
13.3.3. Configure a bell schedule
To create a scheduled bell event, press the button beneath “Edit Bell Schedule” that
applies to the applicable schedule type. This will cause AMS to display the event
date/time page: