Specifications

4193000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • 469.624.7153 fax • TECHNICAL SUPPORT 800.932.6993
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
control system accessories
CC-COM
Programming Port Cable
(FG10-727)
OVERVIEW
TheCC-COMisaprogrammingportcableusedtoconnectaPC’s
COMporttotheNetLinxControllerport.Utilizesa9-pinfemale
connectorononeendanda9-pinfemaled-subconnectoronthe
other(pins2and3swapped,pin5straightthrough).
CC-MDM
Modem Interface Cable
(FG10-725)
OVERVIEW
The CC-MDM is a modem interface cable used to connect a
modemtotheNetLinxControllerport.Utilizesa9-pinfemale
connector on one end and a 25-pin male d-sub connector on the
other(RX,TX,GNDwithRTS/CTSandDSR/DTRloopback).