Specifications
4073000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • 469.624.7153 fax • TECHNICAL SUPPORT 800.932.6993
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
control system accessories
PC1
Power Controller, 10 A
(110 VAC only)
(FG670)
OVERVIEW
The PC1 control provides one switched outlet for 120 VAC power
control with up to 1200 W of equipment power.
COMMON APPLICATION
Ideal for giving power control over devices that may not be easily
controlled via Infrared or other control signal types.
FEATURES
•Front-panelon/offbuttonwithstatusLED
•DIPswitchtosetclosuremode
SPECIFICATIONS
DIMENSIONS (HWD)
•11/2”x51/2”x51/2”(3.8cmx14cmx14cm)
•RU:1
WEIGHT
1lb,12oz(793g)
POWER REQUIREMENT
•PowerInput:105to125VAC,3wattsmaximum(internalelectronics)
•PowerOutputs:1switched3-wiresockets,120VAC,1,200wattstotal
CONTROL PORTS
•Eitheronelatchedortwomomentaryclosuresfordiscreteonandoff,orone
momentaryclosurefortogglingonandoff
•SwitchedACreceptacle,10Aat120VAC
LOAD FUSE
Internal 10 A (load capacity)
CONTROL INPUTS
Remotecontrolcontactandswitchclosure
ENCLOSURE
Metalwithblackmattenish
PRODUCT TYPE
AC switched power control unit
FRONT PANEL
•AC1powerswitchcontrolspowertoaswitched
socket.Thepushbuttonisalatchingon/offswitch.TheLEDinthepushbutton
indicatesthatsocketpowerisON
•DIPSwitch:ControlstheAC1(andAC2)pushbuttonoperatingmode,
depending on the setting of the switches
BACK PANEL
•ACPowerInput:3-conductorlinecordproviding120VACpowertothepower
controlunitandtoswitchedpowersockets
•SwitchedPower:Socketforcontrolofexternalequipmenthavingatotalpower
loadof1,200watts.Aninternal10Aloadfuseisprovided(ThePC2has2
powersockets)
•Control:4-pincaptive-wireconnectorprovidingremoteoperationofthepower
controlunits.Terminalsaccept24–12AWGwire
POWER CORD
6ft(1.83m)cordwith3-wiregroundedplug
RECOMMENDED ACCESSORIES DESCRIPTION PART # PAGE #
AC-RK AccessoryRack (FG515) 410
A CLOSER LOOK
Pushbutton Power Switch with Status LED
DIP switches for
control settings
4-pin captive-wire connector
for power control
120 VAC Output
120 VAC Input
D-TOOLS CERTIFIED PRODUCT
This product can be found in the D-Tools manufacturer product
database and specified as a third party device when building and
proposing a system using D-Tools System Integrator software.