ICSLan Device Control Boxes.......................................... 388 – 397 Power and Sync Sensors.................................................. 398 – 399 Power Distribution............................................................ 400 – 403 Uninterruptible Power Supplies....................................... 404 – 406 Power Controllers............................................................. 407 – 409 Bus Strips, Terminal Adapters and Capture Devices...... 410 – 411 Mounting Brackets........
INTRO D U CTION c o n t r o l s y s t e m a c c e s s o r i e s THE PERFECT ACCESSORIES Reliable, Professional Grade Components to Ensure Effective, Efficient Installations Having the right accessories ensures smooth and efficient installations. And with AMX accessories, you can count on high quality products and out-of-the-box compatibility with other AMX products. Power supplies are a particularly important component of any installation – providing adequate voltage – especially on long cable runs.
INTRO D U CTION c o n t r o l s y s t e m a c c e s s o r i e s The Anterus Radio Frequency Identification (RFID) product line provides real time tracking of assets/devices and people. Anterus can be a stand-alone solution or integrated into a control system to track assets or people. Asset/ device tracking reduces theft with customized alerts and collects location and usage data to effectively manage and budget future needs.
control system accessories EXB-IRS4 ICSLan IR/S Interface, 4 IR/S and 4 Inputs (FG2100-23) OVERVIEW DEALER BENEFITS ICSLan Device Control Boxes allow users to manage devices • Standard, Ethernet-Based Interface – Familiar installation remotely from a Controller over an Ethernet network. This provides a beautifully simple method for a centralized control environment allowing users to share a controller among multiple smaller rooms versus controllers in every room.
E X B - IRS 4 c e n t r a l CONTROLLERS SPECIFICATIONS DIMENSIONS (HWD) • 1” x 4 3/8” x 5 1/8” (2.5 cm cm x 11.1 cm x 13.00 cm) • RU: 1 WEIGHT 1 lb (454 g) POWER • PoE Powered - No local Power Supply needed • Typical power draw: 1.9 Watts • Max power draw: 2.4 Watts OPERATION • Four IR / Serial control ports, 20KHz - 1.
control system accessories EXB-COM2 ICSLan Serial Interface, 2 Ports (FG2100-22) OVERVIEW DEALER BENEFITS ICSLan Device Control Boxes allow users to manage devices • Standard, Ethernet-Based Interface – Familiar installation remotely from a Controller over an Ethernet network. This provides a beautifully simple method for a centralized control environment allowing users to share a controller among multiple smaller rooms versus controllers in every room.
E X B - COM 2 c e n t r a l CONTROLLERS SPECIFICATIONS DIMENSIONS (HWD) • 1” x 4 3/8” x 5 1/8” (2.5 cm cm x 11.1 cm x 13.00 cm) • RU: 1 WEIGHT 1 lb (454 g) POWER • PoE Powered - No local Power Supply needed • Power draw: 1.9 Watts OPERATION • One RS-232/422/485 control port, supports XON/XOFF, CTS/RTS, 300 - 115.2K Baud • One RS-232 control port, supports CTS/RTS, 300 - 115.
control system accessories EXB-REL8 ICSLan Relay Interface, 8 Channels (FG2100-20) OVERVIEW DEALER BENEFITS ICSLan Device Control Boxes allow users to manage devices • Standard, Ethernet-Based Interface – Familiar installation remotely from a Controller over an Ethernet network. This provides a beautifully simple method for a centralized control environment allowing users to share a controller among multiple smaller rooms versus controllers in every room.
E X B - REL 8 c e n t r a l CONTROLLERS SPECIFICATIONS DIMENSIONS (HWD) • 1” x 4 3/8” x 5 1/8” (2.5 cm cm x 11.1 cm x 13.00 cm) • RU: 1 WEIGHT 1.02 lb (463 g) POWER • PoE Powered - No local Power Supply needed • Typical power draw: 1.9 Watts • Max power draw: 3.
control system accessories EXB-I/O8 ICSLan Input/Output Interface, 8 Channels (FG2100-21) OVERVIEW DEALER BENEFITS ICSLan Device Control Boxes allow users to manage devices • Standard, Ethernet-Based Interface – Familiar installation remotely from a Controller over an Ethernet network. This provides a beautifully simple method for a centralized control environment allowing users to share a controller among multiple smaller rooms versus controllers in every room.
E X B - I / O 8 c e n t r a l CONTROLLERS SPECIFICATIONS DIMENSIONS (HWD) • 1” x 4 3/8” x 5 1/8” (2.5 cm cm x 11.1 cm x 13.00 cm) • RU: 1 WEIGHT 1 lb (454 g) POWER • PoE Powered - No local Power Supply needed • Power draw: 1.
control system accessories EXB-MP1 ICSLan Multi-Port, 1 COM, 1 IR/S, 2 I/O, 1 IR RX (FG2100-26) OVERVIEW DEALER BENEFITS ICSLan Device Control Boxes allow users to manage devices • Standard, Ethernet-Based Interface – Familiar installation remotely from a Controller over an Ethernet network. This provides a beautifully simple method for a centralized control environment allowing users to share a controller among multiple smaller rooms versus controllers in every room.
E X B - M P 1 c e n t r a l CONTROLLERS SPECIFICATIONS DIMENSIONS (HWD) • 1” x 3” x 4 13/16” (2.5 cm cm x 7.6 cm cm x 12.2 cm) • RU: 1 POWER • PoE Powered - No local Power Supply needed • Power draw: 1.9 Watts OPERATION • One RS-232 control port, supports CTS/RTS, 300 - 115.2K Baud • Two Input/Output channels • One IR / Serial control port, 20KHz - 1.
control system accessories PCS2 Dual Power Current Sensor (for US 110 VAC 3-pole receptacles) (FG427) OVERVIEW SPECIFICATIONS The PCS2 Dual Power Current Sensor detects the 110 VAC current DIMENSIONS (HWD) drawn by equipment plugged into the onboard AC receptacles, • 1 1/2” x 5 1/2” x 5 1/2” (3.8 cm x 1.4 cm x 1.4 cm) • RU: 1 and the LED status indicators assist with monitoring system applications.
control system accessories VSS2 Video Sync Sensor (FG5916-10) OVERVIEW SPECIFICATIONS The Video Sync Sensor (VSS2) is equipped with two independent DIMENSIONS (HWD) signal detection channels. When a signal is present, each • 1 1/2” x 5” x 5 5/16” (3.8 cm x 12.7 cm x 13.3 cm) • RU: 1 detection channel initiates a logic-level output, and dual video jacks for each channel allow loop-through operation.
control system accessories NXA-PDU-1508-8 Power Distribution Unit 110/220 VAC Power (FG673-01) OVERVIEW The innovative Power Distribution Unit (PDU) now allows you to control the rack as well as control the room. This PDU adds a basic M AK I NG T EC HNOLOGY GREEN The Po w e r Di st ri but i o n U ni t re duc e s e ne rg y usa ge b y e lim in a t in g t h e e l e c t ri c i t y use d by c o m po ne nt s w he n t he y a re i n s t a n d b y m o d e .
NXA-PDU-1508-8 control system accessories 3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3 © January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
NXA-PDU-1508-8 control system accessories SPECIFICATIONS AXLINK MASTER CONNECTOR: • 3.5 mm Phoenix (4-pin) AxLink connector provides connectivity to the NetLinx Master (always on). DIMENSIONS (HWD) • 1 3/16" x 17" x 9 11/16 (3.0 cm x 43.2 cm x 9.
control system accessories CC-C13-C14 C13 to C14 Power Cable (FG10-673-01) OVERVIEW The C13 to C14 Power Cable provides a convenient option to connect a device to the NXA-PDU-1508-8. CC-C14-NEMA C14 to NEMA Power Cable (FG10-673-02) OVERVIEW The C14 to NEMA Power Cable provides a convenient option to connect a device to the NXA-PDU-1508-8. 3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3 © January 2013 AMX.
control system accessories NXA-UPS1500 Uninterruptible Power Supply NXA-UPS1500/120 110-120 VAC (FG678-15) NXA-UPS1500/240 220-240 VAC (FG678-20) OVERVIEW The NXA-UPS1500 Uninterruptible Power Supply is a necessity in protecting AMX control systems and MAX servers from lightning, power surges and power loss.
NXA-UPS1500 control system accessories A C LO SE R LOOK RS2 3 2 C o mmuni ca t i o n Por t DIP Swi t ch USB Communic ation Por t I n p u t Br eak er Ou tp u t Br eak er RJ -4 5 Po r ts Ex ter n al Batter y (N e tw or k Su r g e P r o tecti o n ) Ter m i n al I n p u t Po w er S o ck et (I n l et) 3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3 © January 2013 AMX. All rights reserved.
NXA-UPS1500 control system accessories SPECIFICATIONS DIMENSIONS (HWD) DISPLAY LCD • 3 7/16” x 17 5/16” x 19” (8.8 cm x 44 cm x 48.2 cm) • RU: 2 • Load level (%) • Battery level (%) • Bypass • AVR-Boost/AVR Buck • Battery Low/Replace/Fault • UPS Fault • Site Wiring Fault • Overload WEIGHT 70.3 lbs (31.
control system accessories PC1 Power Controller, 10 A (110 VAC only) (FG670) OVERVIEW SPECIFICATIONS The PC1 control provides one switched outlet for 120 VAC power DIMENSIONS (HWD) control with up to 1200 W of equipment power. • 1 1/2” x 5 1/2” x 5 1/2” (3.8 cm x 14 cm x 14 cm) • RU: 1 COMMON APPLICATION WEIGHT Ideal for giving power control over devices that may not be easily controlled via Infrared or other control signal types.
control system accessories UPC20+ Universal Power/Motor Controller, 20 A (110/220 VAC input) (FG672) OVERVIEW Designed for conduit installation, the Universal Power/Motor Controller, 20 A (110/220 VAC input) is a dual 20-amp AC power HELP FUL HI NT I f U PC 2 0 + i s po w e re d up w he n c ha nge s a re m a de t o D ip S wit ch s e t t i ngs, t he n po w e r m ust be cy cl e d be f o re c ha nge s ca n t a k e e f f e ct . and motor controller.
UPC20+ control system accessories SPECIFICATIONS DIMENSIONS (HWD) HIGH VOLTAGE TERMINAL BLOCK (P1) • 8 1/2” (10 1/2” (including flange) x 4 1/2” x 2 3/16” (22 cm (27 cm (including flange) x 11 cm x 6 cm) • RU: 5 High voltage input and output wiring for motor or power control. LOW VOLTAGE AND CONTROL TERMINAL BLOCK (P2) WEIGHT Contact closure, open-collector or CMOS logic level remote control wiring Inputs 5 - 8 are referenced to the common connection at pin 4 3 lbs (1.
control system accessories ABS SPECIFICATIONS AxLink Bus Strip DIMENSIONS (HWD) • 1 1/8” x 12” x 1 1/4” (2.9 cm x 30.5 cm x 3.2 cm) • RU: 1 (FG960) WEIGHT 5.8 oz (164.42 g) POWER 12 VDC, 7 A max. LED Power indicator (Red) MOUNTING OPTIONS 4” double-sided foam tape OVERVIEW With the ABS AxLink Bus Strip experience plug-and-play wiring, a power (PWR) status LED, and 12 VDC power inputs. Perfect for larger wiring runs the ABS simultaneously accepts in up to 10 AxLink terminals and connectors.
control system accessories IRIS IR/Serial Data Capture Device (FG5448) OVERVIEW SPECIFICATIONS As a stand-alone self-contained unit, the IRIS captures IR or wired DIMENSIONS (HWD) function signals from a hand controller and instantly captures and • 1 1/2” x 5 1/2” x 5 1/2” (3.8 cm x 14 cm x 14 cm) • RU: 1 verifies the control functions, where they are transmitted to a PC operating the IRLIB program.
control system accessories AC-SMB Surface Mounting Bracket (FG525) OVERVIEW These L-shaped brackets can be oriented to align flush with either the top or bottom surface and allow users to mount devices to almost any flat surface; floor, ceiling, wall, table or wherever is convenient for an installation. AC-SMB brackets can be used with NI-700/900 controllers, MAX-CSE, MAX-CSD10, NXA-AVB, NXA-AVB/ETHERNET, and IS-SPX-1000. PS2.8 SPECIFICATIONS 13.5 VDC, 2.8 A Power Supply with 2.
control system accessories PSN2.8 PS3.0 13.5 VDC, 2.8 A Power Supply with 3.5 mm Phoenix Connector 12 VDC, 3.0 A Power Supply with 1.3 mm Barrel Plug (FG423-17) (FG423-30) OVERVIEW OVERVIEW The PSN2.8 power supply provides 2.8 A of DC power for The PS3.0 power supply provides 3.0 A of DC power for the Modero Touch Panels. This is a Class 1 power supply; CSA and CE MVP-5200i Modero Touch Panel and other NetLinx devices. This approved and UL listed.
control system accessories 414 PS4.4 PSN4.4 13.5 VDC, 4.4 A Power Supply with 2.1 mm Coaxial Barrel Connector 13.5 VDC, 4.4 A Power Supply with 3.5 mm Phoenix Connector (FG423-44) (FG423-45) OVERVIEW OVERVIEW The PS4.4 power supply provides 4.4 A of DC power for The PSN4.4 power supply provides 4.4 A of DC power for Modero Modero ViewPoint Touch Panels and MVP Tabletop Docking ViewPoint Touch Panels and NetLinx System Accessories. Includes Station (MVP-TDS). 3.5 mm Phoenix Connector.
control system accessories PSN6.5 13.5 VDC, 6.5 A Power Supply with (3) 3.5 mm Phoenix Connectors (FG423-41) OVERVIEW The PSN6.5 power supply provides 6.5 A of DC power for Modero ViewPoint Touch Panels and NetLinx System Accessories. SPECIFICATIONS DIMENSIONS (HWD) 1 1/2” x 5 9/16” x 9 1/4” (3.81 cm x 14.10 cm x 23.50 cm) WEIGHT 2.76 lb (1.25 Kg) (without power cord) INPUT VOLTAGE • 90-132 VAC, 2.6A, 47~63 Hz • 180-264 VAC, 1.3A, 47~63 Hz OUTPUT VOLTAGE 13.5 VDC OUTPUT CURRENT 6.
control system accessories PS-POE-AF PoE Injector (FG423-80) OVERVIEW SPECIFICATIONS With the PoE Injector, transmit both power and data through a DIMENSIONS (HWD) single cable to a remotely located Power-over-Ethernet (PoE) 5 1/4” x 2 1/8” x 1 7/16” (13.3 cm x 5.4 cm x 3.6 cm) enabled device. This self-contained single-port PoE gigabit power WEIGHT supply “injects” DC power and data into the same Cat5 Ethernet 7 oz (200 grams) INPUT VOLTAGE cable at a distance of up to 100 meters (328 feet).
control system accessories PS-PoE-EX0.9 PoE Extractor For Novara 3000 Series ControlPads (FG423-85) OVERVIEW SPECIFICATIONS The PS-PoE-EX0.9 PoE extractor enables the Novara 3000 Series DIMENSIONS (HWD) ControlPads to be powered via a PoE-enabled switch. The 3” x 2 1/8” x 1” (7 5/8 cm x 5 1/3 cm x 2 1/2 cm) extractor takes a PoE input and outputs a 900mA +12VDC signal WEIGHT to power the ControlPad, and a non-PoE Ethernet signal for communicating with the ControlPad.
control system accessories CC-NET Ethernet Cable (FG10-051-10) OVERVIEW The CC-NET is an industry-standard Cat5 ethernet cable. Utilizes RJ-45 connectors (straight through) on both ends. CC-USB USB Programming Cable (FG10-5965) OVERVIEW The CC-USB is a USB programming cable used to connect a PC’s USB port to Modero® ViewPoint Touch Panels, 7” and 10” Modero Touch Panels, and Modero V and VG Series Touch Panels. Utilizes USB-A connector on one end and USB-mini connector on the other end.
control system accessories CC-COM Programming Port Cable (FG10-727) OVERVIEW The CC-COM is a programming port cable used to connect a PC’s COM port to the NetLinx Controller port. Utilizes a 9-pin female connector on one end and a 9-pin female d-sub connector on the other (pins 2 and 3 swapped, pin 5 straight through). CC-MDM Modem Interface Cable (FG10-725) OVERVIEW The CC-MDM is a modem interface cable used to connect a modem to the NetLinx Controller port.
control system accessories CC-232 Serial Communication Cable CC-232 Standard RS-232 Cable (FG10-752-04) CC-232 Serial Gender-Changer Cable (FG10-889-04) CC-232 Null Modem Serial Cable (FG10-702-04) CC-232 Hardware Handshake Serial Cable (FG10-843-04) CC-232 2.
control system accessories CP-RC01 Infrared Remote Control For Novara 3000 Series ControlPads (FG1302-70) OVERVIEW SPECIFICATIONS The CP-RC01 provides infrared remote control of the 8-and DIMENSIONS (HWD) 17-button Novara 3000 Series ControlPads. Each button on 8" x 2" x 1" (20 cm x 5.5 cm x 2.8 cm) the remote corresponds to a virtual button on the ControlPad, WEIGHT providing simple and convenient control up to 30 feet away from the ControlPad. The CP-RC01 transmits AMX IR codes.
